Yayınlar
SCIE KAPSAMINDAKİ DERGİLERDE YAYINLAR
| 2024 | Mehmet Onur GENÇ, “Data-driven model predictive control using road-based disturbance estimations in longitudinal driving of e-bike”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024, https://dx.doi.org/10.1007/s40430-024-04778-1 |
| 2024 | Gökhan GELEN, Yasemin İÇMEZ, “Task Planning and Formal Control of Robotic Assembly Systems: A Petri Net-Based Approach”, Ain Shams Engineering Journal, 2024, https://dx.doi.org/10.1016/j.asej.2024.102804 |
| 2024 | Adem AVCI, Mustafa KOCAKULAK, Nurettin ACIR, Emrah GÜNEŞ, Sertan TURAN, “A Study On the Monitoring of Weld Quality Using XGBoost with Particle Swarm Optimization”, Ain Shams Engineering Journal, 2024, https://dx.doi.org/10.1016/j.asej.2024.102651 |
| 2023 | Ahmet MERT, “Enhanced Dataset Synthesis Using Conditional Generative Adversarial Networks”, Biomedical Engineering Letters, 2023, https://dx.doi.org/10.1007/s13534-022-00251-x |
| 2023 | Ahmet MERT, “Lightweight Deep Neural Network Models for Electromyography Signal Recognition for Prosthetic Control”, Turkish Journal of Electrical Engineering & Computer Sciences, 2023, https://dx.doi.org/10.55730/1300-0632.4012 |
| 2023 | Ahmet MERT, “Modality Encoded Latent Dataset for Emotion Recognition”, Biomedical Signal Processing and Control, 2023, https://dx.doi.org/10.1016/j.bspc.2022.104140 |
| 2023 | Ali YILDIZ, Nurettin Gökhan ADAR, Ahmet MERT, “Convolutional Neural Network Based Hand Gesture Recognition in Sophisticated Background for Humanoid Robot Control”, The International Arab Journal of Information Technology, 2023, https://dx.doi.org/10.34028/iajit/20/3/9 |
| 2023 | Mehmet Onur GENÇ, “Development of A Digital Twin Model for Electric Bikes Based on Urban Experimental Driving İn Full Electric Mode”, Journal of Mechanical Scıence and Technology, 2023, https://dx.doi.org/10.1007/s12206-023-0750-9 |
| 2023 | Saffet VATANSEVER, Ahmet Emir DİRİK, Nasir MEMON, “The Effect of Inverse Square Law of Light on ENF in Videos Exposed by Rolling Shutter”, IEEE Transactions on Information Forensics and Security, 2023, https://dx.doi.org/10.1109/TIFS.2022.3220029 |
| 2023 | Saffet VATANSEVER, “A Thorough Investigation into the ENF Reconstruction in Videos Exposed by Rolling Shutter”, Institute of Electrical and Electronics Engineers (IEEE), 2023, https://dx.doi.org/10.1109/ACCESS.2023.3312030 |
| 2023 | İsmail ÖZTÜRK, Tayfun BAŞKARA, “B-Pillar Design Optimization Under a Crushing Load”, Materials Testing, 2023, https://dx.doi.org/10.1515/mt-2022-0108 |
| 2023 | İsmail ÖZTÜRK, “Crushing Performance and Optimization of Bio-Inspired Multi-Cell Columns”, Walter de Gruyter GmbH, 2023, https://dx.doi.org/10.1515/mt-2023-0046 |
| 2023 | Alper EMLEK, Murat PEKER, “P3SNet: Parallel Pyramid Pooling Stereo Network”, IEEE Transactions On Intelligent Transportation Systems, 2023, https://dx.doi.org/10.1109/TITS.2023.3276328 |
| 2023 | İlhan TUNÇ, Atakan Yasin YEŞİLYURT, Zeynep GÜMÜŞ, Koralp SERT, Ali Osman KÖROĞLU, Mehmet Turan SÖYLEMEZ, “A Platoon Ordering Algorithm On Reservation Based Intersection Management Systems”, Elsevier BV, 2024, https://dx.doi.org/10.1016/j.aej.2023.12.064 |
| 2023 | İlhan TUNÇ, Mehmet Turan SÖYLEMEZ, “Fuzzy Logic and Deep Q Learning Based Control for Traffic Lights”, Elsevier BV, 2023, https://dx.doi.org/10.1016/j.aej.2022.12.028 |
| 2023 | Ayberk BEYHAN, Nurettin Gökhan ADAR, “Modeling and Real-Time Cartesian Impedance Control of 3-DOF Robotic Arm in Contact with the Surface”, Scientia iİanica, 2023, https://dx.doi.org/10.24200/SCI.2023.59242.6157 |
| 2023 | Oğuz MISIR, “Dynamic Local Path Planning Method Based on Neutrosophic Set Theory for A Mobile Robot”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, https://dx.doi.org/10.1007/s40430-023-04048-6 |
| 2023 | Mustafa KOCAKULAK, Adem AVCI, Nurettin ACIR, “Automated Vein Verification Using Self-Attention-Based Convolutional Neural Networks”, Expert Systems with Applications, 2023, https://dx.doi.org/10.1016/j.eswa.2023.120550 |
| 2022 | Mehmet Onur GENÇ, Necmettin KAYA, Süleyman KONAKÇI, Samet KARTAL, Ali Kamil SERBEST, “Development of a Novel Testing Procedure and Optimization of a Rubber Spring using Constrained Simulated Annealing Algorithm for Automobile Clutch System”, International Journal of Vehicle Design, 2022 |
| 2022 | Saffet VATANSEVER, Ahmet Emir DİRİK, Nasir MEMON, “ENF Based Robust Media Time-Stamping”, IEEE Signal Processing Letters, 2022, https://dx.doi.org/10.1109/LSP.2022.3205563 |
| 2022 | Burak Sercan KAYA, İsmail ÖZTÜRK, “Effect of Heat-Treatment on Crash Performance in Bumper Beam and Crash Box Design and Optimization of the System”, Materials Testing, 2022, https://dx.doi.org/10.1515/mt-2021-2134 |
| 2022 | İsmail ÖZTÜRK, Necmettin KAYA, Ferruh ÖZTÜRK, “Effects of Material Failure Criteria on Design of Vehicle Parts Under Impact Loading”, International Journal of Crashworthiness, 2022, https://dx.doi.org/10.1080/13588265.2020.1774480 |
| 2022 | İsmail ÖZTÜRK, “Design and Optimization of Hybrid Material Bumper Beams Under Impact Loading”, International Journal of Crashworthiness, 2022, https://dx.doi.org/10.1080/13588265.2020.1858626 |
| 2022 | İsmail ÖZTÜRK, “Crashworthiness Design of Heat-Treated Vehicle Parts with Tailored Properties”, Materials Testing, 2022, https://dx.doi.org/10.1515/mt-2022-2001 |
| 2022 | Ali Ogün SARP, Engin Cemal MENGÜÇ, Murat PEKER, Buket ÇOLAK GÜVENÇ, “Data-Adaptive Censoring for Short-Term Wind Speed Predictors Based on MLP, RNN, and SVM”, IEEE Systems Journal, 2022, https://dx.doi.org/10.1109/JSYST.2022.3150749 |
| 2022 | Oğuz MISIR, Mehmet AKAR, “Efficiency and Core Loss Map Estimation with Machine Learning Based Multivariate Polynomial Regression Model”, Mathematics, 2022, https://dx.doi.org/10.3390/math10193691 |
| 2021 | Hasan Hüseyin ÇELİK, Ahmet MERT, “Emotion Recognition Using Time-Frequency Ridges of EEG Signals Based on Multivariate Synchro squeezing Transform”, Biomedical Engineering / Biomedizinische Technik, 2021, https://dx.doi.org/10.1515/bmt-2020-0295 |
| 2021 | Alper EMLEK, Murat PEKER, “Refinement of Matching Costs for Stereo Disparities Using Recurrent Neural Networks”, EURASIP Journal on Image and Video Processing, 2021, https://dx.doi.org/10.1186/s13640-021-00551-9 |
| 2021 | Özge ŞAHİN ÇETİN, Nurettin Gökhan ADAR, Muaz KEMERLİ, Naci ÇAĞLAR, İsmail ŞAHİN, Zekeriya PARLAK, Salih KÜKREK, Tahsin ENGİN, “A Comparative Evaluation of Semi-Active Control Algorithms for Real-Time Seismic Protection of Buildings via Magnetorheological Fluid Dampers”, Journal of Building Engineering, 2021, https://dx.doi.org/10.1016/j.jobe.2021.102795 |
| 2021 | Oğuz MISIR, Levent GÖKREM, “Flocking-Based Self-Organized Aggregation Behavior Method for Swarm Robotics”, Iranian Journal of Science and Technology, Transactions of Electrical Engineering, 2021, https://dx.doi.org/10.1007/s40998-021-00442-9 |
| 2021 | Oğuz MISIR, Levent GÖKREM, “Dynamic Interactive Self Organizing Aggregation Method in Swarm Robots”, Biosystems, 2021, https://dx.doi.org/10.1016/j.biosystems.2021.104451 |
| 2020 | Mehmet Onur GENÇ, Necmettin KAYA, “Design and Verification of Elastomer Spring Damping System for Automobile Powertrain Systems”, Journal of the Faculty of Engineering and Architecture of Gazi University, 2020 |
| 2020 | Ahmet Remzi ÖZCAN, Ahmet Vedat TAVŞANOĞLU, “Optimization of Pedestrian Detection System Using FPGA-CPU Hybrid Implementation for Vehicle Industry”, International Journal of Vehicle Design, 2020, https://dx.doi.org/10.1504/IJVD.2019.109865 |
| 2020 | Oğuz MISIR, Levent GÖKREM, Mehmet Serhat CAN, “Fuzzy-based self-organizing aggregation method for swarm robots”, Biosystems, 2020, https://dx.doi.org/10.1016/j.biosystems.2020.104187 |
| 2019 | Ahmet Remzi ÖZCAN, Sarp ERTÜRK, “Seizure Prediction in Scalp EEG Using 3D Convolutional Neural Networks with an Image-Based Approach”, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2019 |
| 2018 | Mustafa EKER, Mehmet AKAR, Cem EMEKSİZ, Zafer DOĞAN, Ahmet FENERCİOĞLU, “Design of Self-Starting Hybrid Axial Flux Permanent Magnet Synchronous Motor Connected Directly to Line”, Journal of Electrical Engineering Technology, 2018 |
| 2018 | Ahmet MERT, Aydın AKAN, “Emotion Recognition from EEG Signals by Using Multivariate Empirical Mode Decomposition”, Pattern Analysis and Applications, 2018, https://dx.doi.org/10.1007/s10044-016-0567-6 |
| 2018 | Ahmet MERT, Aydın AKAN, “Seizure Onset Detection Based on Frequency Domain Metric of Empirical Mode Decomposition”, Signal, Image and Video Processing, 2018, https://dx.doi.org/10.1007/s11760-018-1304-y |
| 2018 | Fatih KARPAT, Celalettin YÜCE, Oğuz DOĞAN, Mehmet Onur GENÇ, Necmettin KAYA, “Design and Development of Tractor Clutch using Combined Field and Bench Tests”, Transaction Canadian Society for Mechanical Engineering, 2018 |
| 2018 | İsmail ÖZTÜRK, Necmettin KAYA, Ferruh ÖZTÜRK, “Design of Vehicle Parts Under Impact Loading Using a Multi-Objective Design Approach”, Materials Testing, 2018, https://dx.doi.org/10.3139/120.111174 |
| 2017 | Mücahit SOYASLAN, Cemil KÖZKURT, Ahmet FENERCİOĞLU, “A new truck-based order picking model for automated storage and retrieval system (AS/RS)”, Journal of Eng. Research, 2017 |
| 2017 | Mücahit SOYASLAN, Cemil KÖZKURT, Ahmet FENERCİOĞLU, “A new truck-based order picking model for automated storage and retrieval system (AS/RS)”, Journal of Engineering Research, 2017 |
| 2017 | Saffet VATANSEVER, Ahmet Emir DİRİK, Nasir MEMON, “Detecting the Presence of ENF Signal in Digital Videos: A Superpixel-Based Approach”, IEEE Signal Processing Letters, 2017, https://dx.doi.org/10.1109/LSP.2017.2741440 |
| 2017 | Murat PEKER, Applied Soft Computing, 2018, “A Fully Customizable Hardware Implementation for General Purpose Genetic Algorithms”, https://dx.doi.org/10.1016/j.asoc.2017.09.044 |
| 2016 | Ahmet FENERCİOĞLU, Hamit BARUTÇU, “Performance Determination of Novel Design Eddy Current Separator for Recycling of Non-Ferrous Metal Particles”, Journal of Magnetics, 2016, https://dx.doi.org/10.4283/JMAG.2016.21.4.635 |
| 2016 | Ahmet FENERCİOĞLU, “Design and analysis of a magnetically levitated axial flux BLDC motor for a ventricular assist device VAD”, Turkish Journal of Electrical Engineering & Computer Sciences., 2016, https://dx.doi.org/10.3906/elk-1405-139 |
| 2016 | Ahmet MERT, Niyazi KILIÇ, Erdem BİLGİLİ, “Random Subspace Method with Class Separability Weighting”, Expert Systems, 2016, https://dx.doi.org/10.1111/exsy.12149 |
| 2016 | Ahmet MERT, “ECG Feature Extraction Based on the Bandwidth Properties of Variational Mode Decomposition”, Physiological Measurement, 2016, https://dx.doi.org/10.1088/0967-3334/37/4/530 |
| 2016 | Murat UZAM, Zhiwu Li, Gökhan GELEN, R Salah ZAKARIYYA, “A Divide and Conquer Method for The Synthesis of Liveness Enforcing Supervisors for Flexible Manufacturing Systems”, Journal of Intelligent Manufacturing, 2016, https://dx.doi.org/10.1007/s10845-014-0938-z |
| 2016 | Murat UZAM, Gökhan GELEN, T Lawan SALEH, “Think Globally Act Locally Approach with Weighted Arcs to The Synthesis of a Liveness Enforcing Supervisor for Generalized Petri Nets Modeling FMSs”, Information Sciences, 2016, https://dx.doi.org/10.1016/j.ins.2015.09.010 |
| 2016 | Murat YILDIZHAN, Barış EFENDİOĞLU, Necmettin KAYA, İsmail ÖZTÜRK, Emre İsa ALBAK, Ferruh ÖZTÜRK, “Design of Improved Energy Absorbing Pads to Reduce Occupant Injuries in Vehicle Side Impact”, International Journal of Vehicle Design, 2016, https://dx.doi.org/10.1504/IJVD.2016.078775 |
| 2016 | Murat PEKER, Halis ALTUN, Fuat KARAKAYA, “Hardware Implementation of a Scale and Rotation Invariant Object Detection Algorithm on FPGA for Real-Time Applications”, Turkish Journal of Electrical Engineering & Computer Sciences, 2016, https://dx.doi.org/10.3906/elk-1408-187 |
| 2016 | Murat PEKER, Fuat KARAKAYA, “SIH: Segmented Intensity Histogram for Orientation Estimation in Image Matching”, Signal, Image and Video Processing, 2016, https://dx.doi.org/10.1007/s11760-016-0869-6 |
| 2016 | Aysun EĞRİSÖĞÜT TİRYAKİ, Recep KOZAN, Nurettin Gökhan ADAR, “Mathematical Modeling of a Cement Raw Material Blending Process Using a Neural Network”, Materiali in tehnologije, 2016, https://dx.doi.org/10.17222/mit.2014.156 |
| 2016 | Nurettin Gökhan ADAR, Recep KOZAN, “Comparison Between Real Time PID and 2 DOF PID Controller for 6 DOF Robot Arm”, Acta Physica Polonica A, 2016, https://dx.doi.org/10.12693/APhysPolA.130.269 |
| 2015 | Ahmet FENERCİOĞLU, Yusuf AVŞAR, “Design and Analysis of EI Core Structured Transverse Flux Linear Reluctance Actuator”, Turkish Journal of Electrical Engineering & Computer Sciences, 2015, https://dx.doi.org/10.3906/elk-1304-145 |
| 2015 | Ahmet FENERCİOĞLU, Ali KARTAL, “Prototip Eddy Akımı Ayrıştırıcısı İle Bazı Demirsiz Metallerin Geri Kazanım Performansının Belirlenmesi”, Journal of the Faculty of Engineering and Architecture of Gazi University, 2015 |
| 2015 | Ahmet MERT, Mana SEZDİ, Aydın AKAN, “A Test and Simulation Device for Doppler Based Fetal Heart Rate Monitoring”, Turkısh Journal of Electrıcal Engıneerıng Computer Scıences, 2015, https://dx.doi.org/10.3906/ELK-1306-224 |
| 2015 | Ahmet MERT, Niyazi KILIÇ, Erdem BİLGİLİ, Aydın AKAN, “Breast Cancer Detection with Reduced Feature Set”, Computational and Mathematical Methods in Medicine, 2015, https://dx.doi.org/10.1155/2015/265138 |
| 2015 | Gökhan GELEN, Murat UZAM, Li Zhi WU, “A New Method for The Redundancy Analysis of Petri Net-Based Liveness Enforcing Supervisors”, Transactions of the Institute of Measurement and Control, 2015, https://dx.doi.org/10.1177/0142331215620005 |
| 2015 | Aysun EĞRİSÖĞÜT TİRYAKİ, Recep KOZAN, Nurettin Gökhan ADAR, Dürdane Serap KURUCA, “Prediction of Sheet Drawing Characteristics with Square Drawbead Elements Using Response Surface Methodology”, Acta Physica Polonica A, 2015, https://dx.doi.org/10.12693/APhysPolA.128.B-344 |
| 2015 | Nurettin Gökhan ADAR, Aysun EĞRİSÖĞÜT TİRYAKİ, Recep KOZAN, “Real Time Visual Servoing of a 6 DOF Robotic Arm using Fuzzy PID Controller”, Acta Physica Polonica A, 2015, https://dx.doi.org/10.12693/APhysPolA.128.B-348 |
| 2014 | Ahmet MERT, Niyazi KILIÇ, Aydın AKAN, “An Improved Hybrid Feature Reduction for Increased Breast Cancer Diagnostic Performance”, Biomedical Engineering Letters, 2014, https://dx.doi.org/10.1007/s13534-014-0148-9 |
| 2014 | Ahmet MERT, Niyazi KILIÇ, Aydın AKAN, “Evaluation of Bagging Ensemble Method with Time Domain Feature Extraction for Diagnosing of Arrhythmia Beats”, Neural Computing and Applications, 2014, https://dx.doi.org/10.1007/s00521-012-1232-7 |
| 2014 | Murat UZAM, Gökhan GELEN, “Comments on Supervisor Design to Enforce Production Ratio and Absence of Deadlock in Automated Manufacturing Systems”, IEEE Transactions on Systems, Man, and Cybernetics: Systems, 2014, https://dx.doi.org/10.1109/TSMC.2014.2314280 |
| 2014 | Gökhan GELEN, Murat UZAM, “The Synthesis and PLC İmplementation of Hybrid Modular Supervisors for Real Time Control of an Experimental Manufacturing System”, Journal of Manufacturing Systems, 2014, https://dx.doi.org/10.1016/j.jmsy.2014.04.008 |
| 2014 | Murat UZAM, Gökhan GELEN, “Comments on Efficient Deadlock Prevention Policy İn Automated Manufacturing Systems Using Exhausted Resources”, The International Journal of Advanced Manufacturing Technology, 2014, https://dx.doi.org/10.1007/s00170-014-5615-z |
| 2014 | Murat UZAM, Gökhan GELEN, “On Deadlock Free Control of Automated Manufacturing Systems with Flexible Routes and Assembly Operations Using Petri Nets”, The International Journal of Advanced Manufacturing Technology, 2014, https://dx.doi.org/10.1007/s00170-014-6071-5 |
| 2014 | Murat UZAM, Gökhan GELEN, “On A Deadlock Prevention Policy for A Class of Petri Nets S3PMR”, The International Journal of Advanced Manufacturing Technology, 2014, https://dx.doi.org/10.1007/s00170-014-5821-8 |
| 2013 | Uzam Murat, Gelen Gökhan, “An Improved Hybrid Approach for the PLC Based Implementation of Reduced RW Supervisors”, Turkish Journal of Electrical Engineering and Computer Sciences, 2013, https://dx.doi.org/10.3906/elk-1110-29 |
| 2013 | Gökhan GELEN, “Implementation of a Cheap and Flexible Keypad Encoder”, Electronics World, 2013 |
| 2012 | Ahmet FENERCİOĞLU Mahir DURSUN, “Design and Magnetic Analysis of a Double Sided Linear Switched Reluctance Motor”, Prezeglad Elektotekniczny (Electrical Review), 2012 |
| 2011 | Ahmet FENERCİOĞLU, Mahir DURSUN, “Design and Analysis of Outer Rotor In-Wheel Motor”, International Review of Electrical Engineering (I.R.E.E.), 2011 |
| 2011 | Mahir DURSUN, Ahmet FENERCİOĞLU, “Velocity Control of Linear Switched Reluctance Motor for Prototype Elevator Load”, Prezeglad Elektotekniczny (Electrical Review), 2011 |
| 2011 | Mahir DURSUN, Ahmet FENERCİOĞLU, “An Educational Tool for DC Motor PID Speed Controller”, Scientific Research and Essays, 2011 |
| 2010 | Ahmet FENERCİOĞLU, “Design and Magnetically Analysis of Circular Flux Linear Actuator”, Kaunas University of Technology, Electronics and Electrical Engineering, 2010 |
| 2010 | Gökhan GELEN, Murat UZAM, “Novel analysis of Petri net-based controllers by means of TCT implementation tool of supervisory control theory”, Maejo International Journal of Science and Technology, 2010 |
| 2009 | Murat UZAM, Bekir Hakan AKSEBZECİ, Gökhan GELEN, İbrahim Burak KOÇ, “Asynchronous İmplementation of Discrete Event Controllers Based on Safe Automation Petri Nets”, The International Journal of Advanced Manufacturing Technology, 2009, https://dx.doi.org/10.1007/s00170-008-1497-2 |
| 2009 | Murat UZAM, Gökhan GELEN, Control Engineering Practice, 2009, “The Real-Time Supervisory Control of an Experimental Manufacturing System Based on A Hybrid Method”, https://dx.doi.org/10.1016/j.conengprac.2009.05.004 |
| 2007 | Osman GÜRDAL Ahmet FENERCİOĞLU, “Helisel Yapılı Anahtarlamalı Relüktans Motorun HY ARM Bilgisayar Destekli 3 Boyutlu Statik Manyetik Analizi”, Gazi Üniv. Müh. Mim. Fak. Dergisi, 2007 |
DİĞER ENDEKS DERGİLERDE YAYINLAR
| 2024 | Mücahit SOYASLAN, Yusuf AVŞAR, Ahmet FENERCİOĞLU, Feyyaz SARIHAN, “Kayış Tahrikli Asansör Çekiş Makinesinin Tasarımı ve Üretimi: Çift Taraflı Kayış Sisteminin Modellenmesi”, Politeknik Dergisi, 2024, https://dx.doi.org/10.2339/politeknik.1187864 |
| 2024 | Yusuf AVŞAR, Ahmet FENERCİOĞLU, Mücahit SOYASLAN (24.09.2021-26.09.2021), “Design Optimization of PM Synchronous Motor: Belt Drive Elevator Systems”, IEEE Transactions on Industry Applications, 2024 |
| 2024 | Buğra ER, Berk DEMİRSOY, Ahmet FENERCİOĞLU, “Analysis of the Effect of Switching Frequency on Acoustic Noise in External Rotor Brushless DC Motors”, Balkan Journal of Electrical & Computer Engineering, 2024 |
| 2024 | Yusuf AVŞAR, Ahmet FENERCİOĞLU, Mücahit SOYASLAN, “Design Optimization of PM Synchronous Motor: Rail Mounted Belt Drive Elevator Systems”, IEEE Transactions on Industry Applications, 2024 |
| 2024 | Mehmet Onur GENÇ, “Suspension System Design for Pedal-Assisted Cargo E-Quadricycle”, International Journal of Automotive Engineering and Technologies, 2024, https://dx.doi.org/10.18245/ijaet.1290044 |
| 2023 | Mücahit SOYASLAN, Osman ELDOĞAN, Ahmet FENERCİOĞLU, Yusuf AVŞAR, “External Rotor Gearless Elevator Machine: A New Design with Flanged Shaft”, Springer Science and Business Media LLC, 2023, https://dx.doi.org/10.1007/s41939-023-00285-3 |
| 2023 | Yusuf AVŞAR, Ahmet FENERCİOĞLU, Mücahit SOYASLAN, “Raya Montajlı Kayışlı Asansör Makinesinin Kuyu Statik Analizleri”, Gaziosmanpaşa Bilimsel Araştırma Dergisi (GBAD), 2023 |
| 2023 | Ali Berk YALINKILIÇ, Saffet VATANSEVER, “Ses Dosyalarının ENF Tabanlı Adli Analizine Kısa Zamanlı Fourier Dönüşümü Parametre Seçimlerinin Etkisi”, Bandırma Onyedi Eylül Üniversitesi Mühendislik Bilimleri ve Araştırmaları Dergisi, 2023, https://dx.doi.org/10.46387/bjesr.1246180 |
| 2023 | Saffet VATANSEVER, Ahmet EMİR DİRİK, “Farklı çözünürlükteki sayısal imge ve videolar için PRNU tabanlı kaynak kamera tespiti üzerine bir çalışma”, Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 2023, https://dx.doi.org/10.28948/ngumuh.1253242 |
| 2023 | Gökhan GELEN, Murat UZAM, “Computation of The Number of Legal States for Petri Net-Based Deadlock Prevention Problems”, Sigma Journal of Engineering and Natural Sciences, 2023, https://dx.doi.org/10.14744/sigma.2023.00056 |
| 2023 | Serkan ANLAK, Ekrem DÜVEN, “Improving Endpoint Position Control in Hydraulic Testing Machines with a Fuzzy Logic Based Approach”, Journal of Advanced Research in Natural and Applied Sciences, 2023 |
| 2023 | Mustafa KOCAKULAK, Nurettin ACIR, “A Contactless Palmprint Imaging System Design Using MediaPipe Hands”, Journal of Innovative Science and Engineering (JISE), 2023, https://dx.doi.org/10.38088/jise.1142634 |
| 2022 | Fatih DURSUN, Gökhan GELEN, “Düşük Çözünürlüklü Resimlerden Göz Merkezi Belirleme ve İris Yarıçapı Kestirimi için İyileştirilmiş Bir Algoritma”, El-Cezeri: Journal of Science and Engineering, 2022, https://dx.doi.org/10.31202/ecjse.1011443 |
| 2022 | İsmail ÖZTÜRK, “Optimization of a B-Pillar with Tailored Properties Under Impact Loading”, International Journal of Automotive Science and Technology, 2022, https://dx.doi.org/10.30939/ijastech.109644 |
| 2022 | Kays FERATI, Nurettin Gökhan ADAR, “Prediction of Displacement and Stress Values of Composite Materials Under Load with Machine Learning Models”, European Journal of Science and Technology, 2022, https://dx.doi.org/10.31590/ejosat.1188744 |
| 2022 | Hüseyin Can GÜRSOY, Nurettin Gökhan ADAR, “Image Based Control of 2-Dof Ball Balancing System”, Journal of Innovative Science and Engineering (JISE), 2022, https://dx.doi.org/10.38088/jise.1091154 |
| 2022 | Oğuz MISIR, Muhammed ÇELİK, Levent GÖKREM, “Waypoint-Based Path Tracking Approach for Self-Organized Swarm Robots”, Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, 2022, https://dx.doi.org/10.29137/umagd.1118039 |
| 2021 | Ahmet FENERCİOĞLU, Enes AYDIN, Tuba KOCAER, Kerem YILDIRIM, “Santrifuj Pompa için Eddy Akımlı Manyetik Kavramanın Sonlu Elemanlar Analizi”, Journal of New Results in Engineering and Natural Sciences, 2021 |
| 2021 | Ahmet FENERCİOĞLU, Merve ŞEN KURT, Altan ŞAHİN, Hüseyin Zafer KELEŞ, Tuba KOCAER, “Effect of rotor geometry on performance of 6/4 switched Effect of rotor geometry on performance of 6/4 switched reluctance motors reluctance motors”, Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, 2021 |
| 2021 | Mustafa EKER, Yusuf AVŞAR, Ahmet FENERCİOĞLU, “FV Panel Temizliği için Doğrusal Motor ve Mekanizma Tasarımı”, Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2021, https://dx.doi.org/10.35414/akufemubid.890076 |
| 2021 | Ahmet Remzi ÖZCAN, Ahmet MERT, “Low-Cost Android Based Tele-Monitoring System for Body Temperature Measurement”, Journal of Innovative Science and Engineering (JISE), 2021, https://dx.doi.org/10.38088/jise.836743 |
| 2021 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA, “An Experimental Approach to Comparative Thermal Behavior of Rubber and Metallic Clutch Dampers”, International Journal of Automotive Engineering and Technologies, 2021 |
| 2021 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA, Çağlar İMER, Ali Kamil SERBEST, “Experimental Investigation of the Hybrid Damper Clutch System under Dynamic Conditions of an Automobile Powertrain”, European Mechanical Sciences, 2021 |
| 2021 | İsmail ÖZTÜRK, “Design of Multi-Cell Tailored Property Columns Under Oblique Loading”, International Journal of Automotive Science and Technology, 2021, https://dx.doi.org/10.30939/ijastech.961393 |
| 2021 | Ahmet Remzi ÖZCAN, “Low-Cost Android Based Tele-Monitoring System for Body Temperature Measurement”, Journal of Innovative Science and Engineering, Bursa Technical University, 2021, https://dx.doi.org/10.38088/jise.836743 |
| 2021 | Nurettin Gökhan ADAR, “Real Time Control Application of the Robotic Arm Using Neural Network Based Inverse Kinematics Solution”, Sakarya University Journal of Science, 2021, https://dx.doi.org/10.16984/saufenbilder.907312 |
| 2020 | Merve ŞEN KURT, Ahmet FENERCİOĞLU, “Effect of The Variable Resistance Rotor Slot Design on The Performance of the Single-Phase Asynchronous Motor (SPAM)”, Sigma Journal of Engineering and Natural Sciences, 2020 |
| 2020 | Fatih ONAY, Ahmet MERT, “Phasor Represented EMG Feature Extraction Against Varying Contraction Level of Prosthetic Control”, Bıomedıcal Sıgnal Processıng and Control, 2020, https://dx.doi.org/10.1016/j.bspc.2020.101881 |
| 2020 | Fatih ONAY, Ahmet MERT, “Değişken Kuvvetli EMG Sinyallerinin Çok Değişkenli Görgül Kip Ayrışımı İle Analizi Ve Sınıflandırılması”, International Journal of Advances in Engineering and Pure Sciences, 2020 |
| 2020 | Mehmet ONUR GENÇ, Alper KARADUMAN, Mehmet İhsan KARAMANGİL, Ramazan AKTAŞGİL, “Investigation of Clutch Hub Strength with Various Geometries under Variable Torque Conditions”, Sigma Journal of Engineering and Natural Sciences, 2020 |
| 2020 | Mehmet Onur GENÇ, Alper KARADUMAN, “Investigation the Modeling of Genetic Algorithm based Vehicle Powertrain System Optimization”, Sigma Journal of Engineering and Natural Sciences, 2020 |
| 2020 | Mehmet Onur GENÇ, Necmettin KAYA, “Vibration Damping Optimization Using Simulated Annealing Algorithm for Vehicle Powertrain System”, Engineering, Technology & Applied Science Research, 2020 |
| 2020 | Ayetül GELEN, Gökhan GELEN, Aykut BIÇAK, “Supervisory Controller Design for Reactive Power Compensation”, European Journal of Science and Technology, 2020, https://dx.doi.org/10.31590/ejosat.819857 |
| 2020 | Alper EMLEK, Murat PEKER, “Evrişimli Sinir Ağı Tabanlı Derinlik Haritası İyileştirme”, Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 2020, https://dx.doi.org/10.28948/ngumuh.709159 |
| 2020 | İzzet Fatih ŞENTÜRK, Nurettin Gökhan ADAR, Stefan PANIC, Caslav STEFANOVIC, Mete YAĞANOĞLU, Bojan PRILINEVIC, “COVID-19 Risk Assessment in Public Transport Using Ambient Sensor Data and Wireless Communications”, Bulletin of Natural Sciences Research, 2020 |
| 2020 | Ayberk BEYHAN, Nurettin Gökhan ADAR, “Real-Time Vision-Based Grasping Randomly Placed Object by Low-Cost Robotic Arm Using Surf Algorithm”, IOP Conf. Series: Materials Science and Engineering, 2020 |
| 2020 | Oğuz MISIR, Levent GÖKREM, “Nesnelerin İnterneti için MQTT ile Hiyerarşik Haberleşme”, Journal of New Results in Engineering and Natural Sciences, 2020 |
| 2020 | Oğuz MISIR, Levent GÖKREM, “Sürü Robotları için Esnek ve Ölçeklenebilir Toplanma Davranışı Metodu”, European Journal of Science and Technology, 2020, https://dx.doi.org/10.31590/ejosat.779162 |
| 2019 | Mehmet Onur GENÇ, Alper KARADUMAN, “Optimization of Belleville Spring by Inspecting Parameter Impacts”, International Journal of Automotive Science and Technology, 2019 |
| 2019 | Saffet VATANSEVER, Ahmet Emir DİRİK, Nasir MEMON, “Analysis of Rolling Shutter Effect on ENF-based Video Forensics”, IEEE Transactions on Information Forensics and Security, 2019, https://dx.doi.org/10.1109/TIFS.2019.2895540 |
| 2019 | Gökhan GELEN, Sinan ÖZCAN, “Providing the Human-Robot Interaction with Biomimetic Approach”, Pamukkale University Journal of Engineering Sciences, 2019, https://dx.doi.org/10.5505/pajes.2018.83584 |
| 2019 | Furkan DUMAN, Ekrem DÜVEN, “Bir Endüstriyel Robotun Kafessiz Çalışmasını Sağlayacak Görüntü Tabanlı Güvenlik Sisteminin Geliştirilmesi”, Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 2019 |
| 2019 | Kağan Koray AYTEN, Oğuzhan KURNAZ, “Real-Time Implementation of Image Based PLC Control for a Robotic Platform”, Balkan Journal of Electrical and Computer Engineering, 2019, https://dx.doi.org/10.17694/bajece.487212 |
| 2018 | Ahmet FENERCİOĞLU, Mustafa ARPACIOĞLU, Yusuf AVŞAR, “Doğrusal Relüktans Motorun Otomatik Kayar Kapılara Uygulanması ve PIC Mikrodenetleyici ile Kontrolü”, Gaziosmanpaşa Bilimsel Araştırma Dergisi, 2018 |
| 2018 | Merve ŞEN KURT, Ahmet FENERCİOĞLU, “Rotor Slot Distance Effects on Output Parameters in Single-Phase Induction Motors”, Hittite Journal of Science Engineering, 2018, https://dx.doi.org/10.17350/HJSE19030000075 |
| 2018 | Ahmet MERT, Aydın AKAN, “Emotion Recognition Based on Time–Frequency Distribution of EEG Signals Using Multivariate Synchro squeezing Transform”, Dıgıtal Sıgnal Processıng, 2018, https://dx.doi.org/10.1016/j.dsp.2018.07.003 |
| 2018 | Çağlar İMER, Samet KARTAL, Mehmet Onur GENÇ, “Stress Behavior Improvement Analysis of Automobile Flywheel Experimentally and Numerically”, International Journal of Automotive Science and Technology, 2018 |
| 2018 | Mehmet Onur GENÇ, Necmettin KAYA, “Modeling and Experimental Investigation of Clutch Damper Spring Stiffness Effect on Truck Driving Comfort”, International Journal of Advances on Automotive and Technology, 2018 |
| 2018 | Mehmet Onur GENÇ, Burak BUDAK, Necmettin KAYA, “Modeling and Vibration Analysis of Powertrain System”, International Journal of Automotive Science and Technology, 2018 |
| 2018 | Murat PEKER, “Endüstriyel Uygulamalar İçin Analog Gösterge Okuyucu Sistemi”, Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2018, https://dx.doi.org/10.29109/gujsc.439795 |
| 2018 | Oğuz MISIR, Cafer BAL, Levent GÖKREM, “Can Bus Tabanlı Silo Alan Ağı Tasarımı”, Journal of Gaziosmanpaşa Scientific Research, 2018 |
| 2017 | Ahmet FENERCİOĞLU, Merve ŞEN KURT, “Design and Analysis of In-Drum Outer Rotor BLDC Motor for Eddy Current Separator”, Hittite J Sci Eng, 2017, https://dx.doi.org/10.17350/HJSE19030000045 |
| 2017 | Fatih KARPAT, Celalettin YÜCE, Oğuz DOĞAN, Mehmet Onur GENÇ, “Design Verification of Tractor Clutch Cover under High Centrifugal Effect”, International Journal of Automotive Science and Technology, 2017 |
| 2017 | Saffet VATANSEVER, Ahmet Emir DİRİK, “Videoların ENF Tabanlı Adli Kanıt Analizine Işık Kaynağı Etkisi”, Uludağ University Journal of the Faculty of Engineering, 2017, https://dx.doi.org/10.17482/uumfd.305193 |
| 2016 | Ahmet FENERCİOĞLU, İNGENÇ Elif, DEMİRYÜREK Salih Can, “The Performance Analysis of an Air-Gapped Transformer Used in Wireless Charging System for Shuttle Robot”, Journal of New Results in Science, 2016 |
| 2016 | Veli TÜRKMENOĞLU, Serdal ARSLAN, YUSUFOĞLU Abdullah, Ahmet FENERCİOĞLU, ATASORGUN Muharrem, “Neodyum Mıknatıslı Senkron Generatörlerde Tasarım Parametre Değişikliklerinin Generatör Verimine Etkisi”, İleri Teknoloji Bilimleri Dergisi, 2016 |
| 2016 | Yusuf AVŞAR, Ahmet FENERCİOĞLU, “Structural Analysis of Linear Switched Reluctance Motor Designed EI Core”, The Online Journal of Science and Technology, 2016 |
| 2016 | Ahmet FENERCİOĞLU, Hamit BARUTÇU, “Yeni Bir Eddy Akımı Ayrıştırıcısı ile Küçük Boyutlu Demirsiz Metallerin Ayrıştırılması”, Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 2016 |
| 2016 | Selma YILMAZYILDIZ KAYAARMA, Read ROBIN, Belpaeme TONY, Werner VERHELST, “Review of Semantic-Free Utterances in Social Human-Robot Interaction”, International Journal of Human-Computer Interaction, 2016, https://doi.org/10.1080/10447318.2015.1093856 |
| 2015 | Mahir DURSUN, Ali SAYGIN, Semih ÖZDEN, Ahmet FENERCİOĞLU, “A New Design of Single-Side Brushless Direct Current Linear Motor”, Journal of Automation and Control Engineering, 2015, https://dx.doi.org/ 10.12720/joace.3.4.336-342 |
| 2015 | Selma YILMAZYILDIZ KAYAARMA, Werner VERHELST, Hichem SAHLI, “Gibberish Speech as A Tool for The Study of Affective Expressiveness for Robotic Agents”, Multimedia Tools and Applications, 2015, https://dx.doi.org/10.1007/s11042-014-2165-1 |
| 2014 | Ahmet MERT, Aydın AKAN, “Detrended Fluctuation Thresholding for Empirical Mode Decomposition Based Denoising”, Digital Signal Processing, 2014, https://dx.doi.org/10.1016/j.dsp.2014.06.006 |
| 2013 | Sibel YENİKAYA, Gökhan YENİKAYA, Ekrem DÜVEN, “Keeping the Vehicle on the Road-A Survey On On-Road Lane Detection Systems”, ACM Computing Surveys, 2013, https://dx.doi.org/10.1145/2522968.2522970 |
| 2013 | Nurettin Gökhan ADAR, Hüseyin ören, Recep KOZAN, “5 Serbestlik Dereceli Robot Kolunun Modellenmesi Ve Kontrolü”, Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2013 |
| 2012 | Cemil KÖZKURT, Ahmet FENERCİOĞLU, Mehmet AKAR, “Otomatik Depolama Sistemlerindeki Robotlar için Servo Motor Seçimi”, Gaziosmanpaşa Bilimsel Araştırma Dergisi, 2012 |
| 2012 | Murat UZAM, Gökhan GELEN, Recep DALCI, “Ladder Logic Implementation of Ramadge Wonham Supervisors with Timed Transitions”, Mechatronic Systems, 2012 |
| 2009 | Ahmet MERT, Süleyman ÖZKAYNAK, Haluk KÜÇÜK, “Dizel Motor Eğitimi İçin Labview Tabanlı Veri Edinimi Ve Kontrol Arayüzü Tasarımı”, Makinatek, 2009 |
| 2008 | Ahmet FENERCİOĞLU, “Vida Pompa Yapılı Anahtarlamalı Relüktans Motor Tasarım Önerisi ve Statik Manyetik Analizi”, Pamukkale Üniversitesi, Mühendislik Bilimleri Dergisi, 2008 |
| 2008 | Ahmet FENERCİOĞLU, İlhan TARIMER, “Anahtarlamalı Relüktans Motor Tasarımlarında Farklı Rotor Geometrilerinin Motor Güç Ve Tork Üretimine Etkilerinin İncelenmesi”, Balıkesir Üniversitesi, Fen Bilimleri Dergisi, 2008 |
| 2008 | İsmail ÖZTÜRK, Necmettin KAYA, “Otomobil Ön Tampon Çarpışma Analizi ve Optimizasyonu”, Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 2008 |
| 2008 | Jelle SALDIEN, Kristof GORIS, Selma YILMAZYILDIZ KAYAARMA, Werner VERHELST, Dirk LEFEBER, “On The Design of the Huggable Robot Probo”, Journal of Physical Agents, 2008 |
| 2007 | Ahmet FENERCİOĞLU, İlhan TARIMER, “Bir Manyetik Sistemin Maxwell 3d Alan Simülatörü İle Statik Manyetik Analizinin Çözüm Süreçleri”, Selçuk Üniversitesi Teknik Bilimler Meslek Yüksekokulu Teknik-Online Dergisi, 2007 |
| 2007 | Ahmet FENERCİOĞLU, İlhan TARIMER, “Anahtarlamalı Relüktans Motorlarda Faz Endüktansına Etki Eden Faktörlerin İncelenmesi”, Pamukkale Üniversitesi, Mühendislik Bilimleri Dergisi, 2007 |
| 2007 | Murat UZAM, Gökhan GELEN, İbrahim BURAK KOÇ, Bekir Hakan AKSEBZECİ, “Ayrık Olay Kontrol Sistemlerinin Petri Ağları ile Tasarımı ve PLC ile Gerçekleştirilmesi”, Endüstri & Otomasyon 2007 |
| 2007 | Gökhan GELEN, Bekir Hakan AKSEBZECİ, İbrahim Burak KOÇ, Murat UZAM, “Basit Otomasyon Petri Ağları ile Ayrık Olay Sistemlerinin Modellenmesi”, Endüstri & Otomasyon, 2007 |
| 2005 | Osman Hilmi KOÇAL, Ekrem DÜVEN, “Çift ve Tek Baskı Yaylı Konvansiyonel Dizel Yakıt Enjektörlerinin Fonksiyon ve Önayar Makine Verimlerinin Yazılım Müdahalesi ile İyileştirilmesi”, Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 2005 |
SEMPOZYUM BİLDİRİLERİ
| 2024 | Hüseyin ERGİN, Mücahit Engin KARADENİZ, Gökhan GELEN | Servo Control Design and Application for Ayran Packaging Line Capping Unit | 3rd International Paris Congress on Applied Sciences |
| 2024 | Murat IŞIK, Mehmet ONUR GENÇ | Experimental Investigation on Effect of SBS Material Production Characteristics to Vehicle NVH Performance in HVAC Systems | 5th International Bursa Scientific Research Congress |
| 2024 | Oğuz MISIR | RRT ve RRT* Algoritmalarının Parametre Değişimlerinin Hareket Planlamaya Etkisi Üzerine Bir İnceleme | 5th International Bursa Scientific Researchs Congress |
| 2024 | Melike BEYAZLI, Sümeyye ALP, Görkem Burak TAŞKIN, Zeynep IŞIK, Oğuz MISIR | Development of Autonomous Mobile Robot with Four-Wheeled Payload Carrying Capability | 4. Uluslararası Ege Bilimsel Araştırmalar Sempozyumu (UEBAS’24) |
| 2023 | Ahmet FENERCİOĞLU, Dağhan ATAKAY, Emre PINARBAŞI | Permanent Magnet Synchronous Motor Design for Rope-Driven Gearless Elevator Machine | ICENTE 2023 |
| 2023 | Tuğba BOZKURT, Ahmet FENERCİOĞLU | Fırçasız DA Motorlu Bir Pompada Halka Ferrit Mıknatıs Kullanımının Maliyet, Üretilebilirlik ve Performans Açısından Değerlendirilmesi | International Symposium on Automotive Science and Technology |
| 2023 | Buğra ER, Ahmet FENERCİOĞLU | Güç Elektroniği Uygulamalarında Kullanılan Mosfet’ler İçin Otomotiv Standartları ve Verimlilik İyileştirmeleri | 4th International “Artemis” Congress on Life, Engineering, and Applied Sciences |
| 2023 | Buğra ER, Samet ALTUNDAĞ, Ahmet FENERCİOĞLU | Otobüs İklimlendirme Sistemlerinin Kontrolünün İncelenmesi | 13TH International Istanbul Scientific Research Congress on Life, Engineering, AND Applied Sciences |
| 2023 | Volkan İNCE, Ahmet MERT | Evrişimsel Sinir Ağları Kullanarak Bitkilerin Sulama İhtiyacının Tespiti | International Euroasia Congress on Scientific Researches and Recent Trends-10 |
| 2023 | Ahmet MERT, Beyza Sena ŞAHIN | Yeniden Yapılandırılabilir Gripper Tasarımı ve Endüstriyel Montaj Alanında İncelenmesi | 4th International Black Sea Modern Scientific Research Congress |
| 2023 | Ekrem DÜVEN, Serkan ANLAK | Hidrolik Test Makinelerinde Tekrarlanan Hareketler İçin Pozisyon Doğruluğunun İyileştirilmesi | Uluslararası Marmara Fen Bilimleri Kongresi-IMASCON 2023 |
| 2023 | Hüseyin ERGİN, Yasin KAYA, Gökhan GELEN | A Novel Rectangular Nozzle Design and motion control to Increase the Speed of Yogurt Filling Machines | IV. International Science and Innovation Congress |
| 2023 | Ali Aras FIRAT, Ahmet Fatih OLGUNÖZ, İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | Derin Q Öğrenmeye Dayalı Akıllı Trafik Sinyal Kontrol Stratejileri Intelligent Traffic Signal Control Strategies Based on Deep Q Learning | TOK’2023 24. Otomatik Kontrol Ulusal Toplantısı |
| 2023 | Furkan GÜNEY, Hasan YILDIZ, Hilal ÇORUH, İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | Derin Q-Öğrenimi ile Acil Durum Araçlarının Kontrolü Control of Emergency Vehicles with Deep Q-Learning | TOK’2023 24. Otomatik Kontrol Ulusal Toplantısı |
| 2023 | Mehmet Onur GENÇ, ÇAĞLAR İMER | Impulse Shock Effect Analysis of Vehicle Curb Crash on Double Mass Flywheel | 12th International Congress on Engineering, Architecture, and Design |
| 2023 | Mehmet Onur GENÇ | Development of Powertrain System Model for Electric Bicycles Having Hub Motor | 3rd International Conference on Engineering and Applied Natural Sciences |
| 2023 | Mehmet Onur GENÇ, Murat IŞIK | Experimental Investigation of Transmissibility Effects on NVH Performance in Vehicle HVAC System | 3rd International Conference on Scientific and Academic Research |
| 2023 | Nurten ÖZKAN, Neslihan DOĞAN SAĞLAMTİMUR, Murat PEKER | Preliminary Results for Smart Waste Bin Production | VIII. International New York Academic Research Congress on Life, Engineering, and Applied Sciences |
| 2023 | Neslihan DOĞAN SAĞLAMTİMUR, Murat PEKER | Preliminary Results for Smart Waste Classification Module | 15th International İstanbul Scientific Research Congress On Life |
| 2023 | Oğuz MISIR | Examination of The Real-Time Performance of the U-Net Segmentation Model | ASES International Bandırma Scientific Studies Conference |
| 2023 | Seyfullah GÜNEŞ, Saffet VATANSEVER | A Survey of Source Camera Attribution Applications Using PRNU | ASYU 2023-Akıllı Sistemlerde Yenilikler ve Uygulamaları Konferansı |
| 2023 | Seyfullah GÜNEŞ, Saffet VATANSEVER | Medya Adli Bilişiminde Elekrik Şebeke Frekansına (Enf) Dayalı Uygulamaların İncelenmesi | 5th International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA) |
| 2023 | Azad AYBERGÜLER, Enis ARSLAN, Selma YILMAZYILDIZ KAYAARMA | Deep Learning Based Growth Analysis and Disease Detection in Strawberry Cultivation | 2023 Innovations in Intelligent Systems and Applications Conference (ASYU) |
| 2022 | Ahmet FENERCİOĞLU, Mücahit SOYASLAN, Yusuf AVŞAR, Feyyaz SARIHAN, Dağhan ATAKAY, Feyyaz SARIHAN | Halatlı ve Kayışlı Sistemlerde Kullanılan Asansör Motorlarının Performans Değerlendirmesi | 4th International Conference on Applied Engineering and Natural Sciences ICAENS2022 |
| 2022 | Ahmet MERT, Eren Bariş ALICI | A Review into Generative Adversarial Network | 1st International Conference on Engineering, Natural and Social Sciences |
| 2022 | Duygu HELVACI, Emin SEZGIN, GÖKHAN GELEN | A Smart Seat Design for Long-Distance Buses: Tech Seat | III. International Science and Innovation Congress |
| 2022 | Mehmet Onur GENÇ, Necmettin KAYA | System Optimization of Battery Discharge State using Artificial Neural Network in an Electric Vehicle Powertrain | 19th International Conference on Machine Design and Production |
| 2022 | Alper EMLEK, Murat PEKER | Arındırılmış Görüntüler ile Yaya Tespiti için Derinlik Bazlı Uyarlanabilir Parametre Seçimi | IV. International Turkic World Congress on Science and Engineering |
| 2022 | Mustafa KOCAKULAK, Nurettin ACIR | Dynamic ROI Extraction for Palmprints using MediaPipe Hands | 2022 30th Signal Processing and Communications Applications Conference (SIU) |
| 2022 | Kays FERATI, Nurettin Gökhan ADAR | Makine Öğrenmesi ile Kompozit Malzemelerin Yük Altındaki Yer Değiştirme ve Gerilme Değerlerinin Tahmini | 2nd International Conference on Engineering and Applied Natural Sciences |
| 2022 | Oğuz MISIR | Visual-Based Obstacle Avoidance Using an Advanced Deep Learning Network Method for Mobile Robots | III. International Science and Innovation Congress |
| 2022 | Mustafa KORKMAZ, Saffet VATANSEVER | Videolardan Kalp Atış Hızı Kestirimi Üzerine Bir İnceleme | 6th International Symposium on Innovative Approaches in Smart Technologies (ISAS) |
| 2021 | Buğra ER, Tuba KOCAER, Çağlar ACAR, Ahmet FENERCİOĞLU | BLDC Motor Sürücüsü Anahtarlama Frekansının Motor Performansına Etkileri | BİLMES 2021 |
| 2021 | Muhammed MAHBUP İBİŞ, Ahmet FENERCİOĞLU | Spoke Tip on Kutuplu Fırçasız Doğru Akım Motoru Tasarımı ve Analizi | Uluslararası Katılımlı Mekatronik Öğrenci Konferansı MEKON 2021 |
| 2021 | Halil AYDIN, İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | Fuzzy Logic Controller for Leader-Follower Based Navigation of Mobile Robots in a ROS-Enabled Environment | 13th International Conference on Electrical and Electronics Engineering |
| 2021 | Atakan Yasin YEŞİLYURT, İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | A Reservation Method for Multi-Agent System Intersection Management with Energy Consumption Considerations | 16th IFAC Symposium on Control in Transportation Systems CTS 2021 |
| 2021 | İlhan TUNÇ, Atakan Yasin YEŞİLYURT, Mehmet Turan SÖYLEMEZ | Different Fuzzy Logic Control Strategies for Traffic Signal Timing Control with State Inputs | 16th IFAC Symposium on Control in Transportation Systems CTS 2021 |
| 2021 | Ali Osman KÖROĞLU, Ali Emre EDEM, Serra Nur AKMEŞE, Özge ELMAS, İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | Agent Based Route Planning with Deep Q Learning | 13th International Conference on Electrical and Electronics Engineering |
| 2021 | İlhan TUNÇ, Özge ELMAS, Ali Emre EDEM, Ali Osman KÖROĞLU, Serra Nur AKMEŞE, Mehmet Turan SÖYLEMEZ | Derin Q Öğrenme Tekniği ile Ajan Bazlı Trafik Işık Kontrolü Agent Based Traffic Light Control with Deep Q Learning Technique | TOK 2021 Otomatik Kontrol Ulusal Kongresi |
| 2021 | İlhan TUNÇ, Ali Osman KÖROĞLU, Ali Emre EDEM, Serra Nur AKMEŞE, Özge ELMAS, Mehmet Turan SÖYLEMEZ | Traffic Light Control for Multi Intersection Model in İstanbul/Altunizade | 29th Mediterranean Conference on Control and Automation (MED 2021) |
| 2021 | İsmail ÖZTÜRK | Crash Performance Comparison of AA 2024 And DP 590 Vehicle Front Rails | 10th International Automotive Technologies Congress, OTEKON 2020 |
| 2021 | Mehmet Onur GENÇ, Necmettin KAYA | Estimation of battery state of Charge Using Artificial Neural Network in an Electric Vehicle System | OTEKON Congress 2021 |
| 2021 | Derya SAPAN, Mehmet Onur GENÇ, Samet KARTAL | Mass, Center of Balance and Unbalance Prediction of an Asymmetrical Clutch Cover with Stamping Simulation | OTEKON Congress 2021 |
| 2021 | Mehmet Onur GENÇ, Necmettin KAYA | Comfort Parameter Estimation using Artificial Neural Network in Vehicle Powertrain System | International Conference on Interdisciplinary Applications of Artificial Intelligence |
| 2021 | Alper EMLEK, Murat PEKER | Horizontal Attention Convolution Layer for Stereo Matching | 29th Signal Processing and Communications Applications Conference (SIU) |
| 2021 | Gürkan AYDEMİR, Oğuzhan KURNAZ, Tahir BEKİRYAZICI, Adem AVCI, Mustafa KOCAKULAK | Driver Drowsiness Detection Using MobileNets and Long Short-term Memory | 13th International Conference on Electrical and Electronics Engineering (ELECO) |
| 2021 | Gürkan AYDEMİR, Adem AVCI, Mustafa KOCAKULAK, Tahir BEKİRYAZICI | Ensemble of LSTM Networks for Fault Detection, Classification, and Root Cause Identification in Quality Control Line | PHM Society European Conference |
| 2021 | Gürkan AYDEMİR, Oğuzhan KURNAZ, Tahir BEKİRYAZICI, Adem AVCI, Mustafa KOCAKULAK | Driver Drowsiness Detection using MobileNets and Long Short-term Memory | 13th International Conference on Electrical and Electronics Engıneering |
| 2021 | Oğuzhan KURNAZ, Cemal HANİLÇİ | Multi-İmage Crowd Counting Using Multi-Column Convolutional Neural Network | Sixth International Congress on Information and Communication Technology (ICICT 2021) |
| 2020 | Ahmet FENERCİOĞLU, Yusuf AVŞAR | Finite Element Analysis of Eddy Current Actuator for Linear Motion | 2020 27th International Workshop on Electric Drives: MPEI Department of Electric Drives 90th Anniversary (IWED) |
| 2020 | Fatih ONAY, Ahmet MERT | Amputee Electromyography Signal Classification Using Convolutional Neural Network | 2020 Medical Technologies Congress (TIPTEKNO) |
| 2020 | İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | Intelligent Intersection Management Using Fuzzy Logic Control and PI Control | Transport Research Arena 2020 (TRA 2020) |
| 2020 | İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | State Feedback Control for Intelligent Traffic Light Systems | 2020 28th Mediterranean Conference on Control and Automation (MED) |
| 2020 | Oğuz MISIR, Levent GÖKREM | Flexible and Scalable Aggregation Behavior Method for Swarm Robots | 2nd International Congress on Human-Computer Interaction, Optimization and Robotic Applications |
| 2020 | Oğuzhan KURNAZ, Cemal HANİLÇİ | Çok Sütunlu Derin Sinir Ağları Kullanarak Çok İmgeli Kalabalık Yoğunluk Kestirimi | Signal Processing and Communications Applications Conference (SIU) |
| 2019 | Mücahit SOYASLAN, Yusuf AVŞAR, Ahmet FENERCİOĞLU, Osman ELDOĞAN | Cogging Torque Reduction in External Rotor PM Synchronous Motors by Optimum Pole Embrace | 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT) |
| 2019 | Ahmet FENERCİOĞLU, Merve ŞEN KURT, Altan ŞAHİN, Hüseyin Zafer KELEŞ | 6/4 Kutuplu Anahtarlamalı Relüktans Motorlarda Farklı Rotor Tasarımlarının Etkileri | EEMKON2019 |
| 2019 | Mustafa ÇOBAN, Özgür Turay KAYMAKÇI, Gökhan GELEN | Reliability Analysis of Assembly Processes Performed by Human-Robot Interaction | 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT) |
| 2019 | İlhan TUNÇ, Atakan Yasin YEŞİLYURT, Mehmet Turan SÖYLEMEZ | Intelligent Traffic Light Control System Simulation for Different Strategies with Fuzzy Logic Controller | 2019 11th International Conference on Electrical and Electronics Engineering (ELECO) |
| 2019 | İlhan TUNÇ, Mehmet Turan SÖYLEMEZ | Kavşak Yönetiminde Bulanık Mantık ve PI Kontrol Yöntemlerinin Benzetimi | TOK 2019 |
| 2019 | İsmail ÖZTÜRK | Comparison of Crash Performance of Vehicle Front Bumper Beams Designed from Advanced High Strength Steel Materials | International Symposium on Automotive Science and Technology |
| 2019 | Necmettin KAYA, Mehmet Onur GENÇ | Design Optimization of a Beam Structure of Machine Tools | ASME IMECE 2019 |
| 2019 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA | Experimental Verification of Rubber Clutch Spring Damper Torque Behavior in Time-Dependent Manner and System Optimization Using Simulated Annealing Algorithm Integrated with 1-D Modeling | ASME IMECE 2019 |
| 2019 | Cihat GÜL, Mehmet Onur GENÇ, Ali DURMUŞ | Shock Strength Investigation of Sintered Clutch Disc Hub Experimentally with Modified Charpy Test Bench | ICAIAME 2019 |
| 2019 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA | 1-D Modeling of Rubber Clutch Damper at Time-Based Level for Powertrain System | ICAIAME 2019 |
| 2019 | Murat PEKER | Comparison of Tensorflow Object Detection Networks for License Plate Localization | 2019 1st Global Power, Energy and Communication Conference (GPECOM) |
| 2019 | Dilara GÜMÜŞBAŞ DONIDA LABATI, Tülay YILDIRIM, Mustafa KOCAKULAK, Nurettin ACIR | Capsule Network for Finger-Vein-based Biometric Identification | 2019 IEEE Symposium Series on Computational Intelligence (IEEE SSCI 2019) |
| 2019 | Adem AVCI, Mustafa KOCAKULAK, Nurettin ACIR | Convolutional Neural Network Designs for Finger-Vein-Based Biometric Identification | 11th International Conference on Electrical and Electronics Engineering (ELECO 2019) |
| 2019 | Ayberk BEYHAN, Nurettin Gökhan ADAR | Detailed Kinematic Analysis and Real-Time Application of the 4-DOF Low Cost Robotic Arm | 11th International Conference on Electrical and Electronics Engineering |
| 2019 | Oğuzhan KURNAZ, Cemal HANİLÇİ | Features and Regression Techniques for Crowd Density Estimation: A Comparison | 2019 11th International Conference on Electrical and Electronics Engineering (ELECO) |
| 2019 | Saffet VATANSEVER, Ahmet Emir DİRİK, Nasir MEMON | Factors Affecting Enf Based Time-Of-Recording Estimation for Video | ICASSP 2019-2019 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) |
| 2019 | Selma YILMAZYILDIZ KAYAARMA, Sherik LEHAL, Hichem SAHLI | Politeness Detection in Speech for Human-Computer Interaction | 31th Benelux Conference on Artificial Intelligence (BNAIC 2019) |
| 2018 | Bilal OKAN İÇMEZ, Ahmet FENERCİOĞLU, Burak KARA | 3 Fazlı İndüksiyon Motorlarda Rotor Çubuk Kaykısının Performansa Etkileri | II. Uluslararası Bilimsel ve Mesleki Çalışmalar Kongresi |
| 2018 | Burak KARA, Ahmet FENERCİOĞLU, Bilal Okan İÇMEZ | Bir Fazlı Asenkron Motorlarda Daimi Kapasitörün Çıkış Performansına Etkisinin Sonlu Elemanlar Yöntemi ile Analizi | 3. Uluslararası Mesleki ve Teknik Bilimler Kongresi |
| 2018 | Fatih ONAY, Ahmet MERT | Multivariate Empirical Mode Decomposition Based EMG Signal Analysis for Smart Prosthesis | 2018 26th Signal Processing and Communications Applications Conference (SIU) |
| 2018 | Mustafa ÇOBAN, Gökhan GELEN | Wireless Teleoperation of an Industrial Robot by Using Myo Arm Band | International Conference on Artificial Intelligence and Data Processing (IDAP 2018) |
| 2018 | Mustafa ÇOBAN, Gökhan GELEN | Realization of Human-Robot Collaboration in Hybrid Assembly Systems by Using Wearable Technology | 6th International Conference on Control Engineering and Information Technologies |
| 2018 | Mustafa ÇOBAN, Gökhan GELEN | Endüstriyel Robotlar için Ayrık Olay Sistemi Yaklaşımı ile Formel Kod Elde Edilmesi | 2018 Türkiye Robotbilim Konferansı (TORK2018) |
| 2018 | İsmail ÖZTÜRK, Necmettin KAYA, Ferruh ÖZTÜRK | Çok Amaçlı Kriterleri Sağlayan Hızlandırılmış Tasarım Yaklaşımı Ile Taşıtlarda Darbeye Maruz Kalan Elemanların Tasarım | 9th International Automotive Technologies Congress |
| 2018 | İsmail ÖZTÜRK, Ferruh ÖZTÜRK | Effects of Material Failure Criteria On Advanced High-Strength Steels | International Conference on Multidisciplinary Sciences (ICOMUS) |
| 2018 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA | Experimental and Numerical Approach on Viscoelastic Modelling of Rubber Clutch Damper Spring | OTEKON Congress 2018 |
| 2018 | Mehmet Onur GENÇ, Ahmet Koray PEHLİVAN, Necmettin KAYA | 1-D Modelling and System Optimization of Truck Powertrain System Used with PTO Front Damper | ICAMMEN Congress |
| 2018 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA | Using of Response Surface Methodology for the Design of Rubber Damper on Clutch Disc | ICAMMEN Congress |
| 2018 | Alper EMLEK, Murat PEKER, Mehmet Kürşat YALÇIN | Improving the Cost-Volume Based Local Stereo Matching Algorithm | 2018 26th Signal Processing and Communications Applications Conference (SIU) |
| 2018 | Engin Cemal MENGÜÇ, Murat PEKER, Salim ÇINAR | Comparison of Split Complex-Valued Metaheuristic Optimization Algorithms for System Identification Problem | 2018 26th Signal Processing and Communications Applications Conference (SIU) |
| 2018 | Mustafa KOCAKULAK, Nurettin ACIR | Enhancement of Finger Vein Images Using Gabor Filter | 2018 26th Signal Processing and Communications Applications Conference (SIU) |
| 2018 | Nurettin Gökhan ADAR, Mustafa EROĞLU, Recep KOZAN | PI and Self-Tuning PI Controller Design and Comparison for Speed control of DC Motor | International Conference on Advanced Technologies, Computer Engineering and Science (ICATSES 18) |
| 2018 | Mustafa EROĞLU, Mehmet Akif KOÇ, İsmail ESEN, Nurettin Gökhan ADAR | Predicting The Dynamic Behaviors of the Railway Vehicle Using the Finite Element Method and Fuzzy Logic | 4th International Symposium on Railway Systems Engineering |
| 2018 | Oğuz MISIR, Cafer BAL, Levent GÖKREM | Silo Sistemleri İçin Can Bus Destekli Silo Alan Ağı | I. Uluslararası Bilimsel Çalışmalarda Yenilikçi Yaklaşımlar Sempozyumu |
| 2018 | Oğuz MISIR, Levent GÖKREM | MQTT ile Hiyerarşik Konu Tabanlı Haberleşme | I. Uluslararası Bilimsel Çalışmalarda Yenilikçi Yaklaşımlar Sempozyumu |
| 2017 | Ahmet FENERCİOĞLU, Merve ŞEN KURT, Mehmet AKAR, Ünal KURT | Performance Analysis of Single-Phase Induction Motor for Different Rotor Slot Types | ICAT 2017 |
| 2017 | Cemil KÖZKURT, Ahmet FENERCİOĞLU | Ventriküler Destek Cihazı için Multidisipliner Tasarım Yaklaşımı | ISMSIT 2017 |
| 2017 | Memet ÜÇGÜL, Ahmet FENERCİOĞLU, Yasemin ÖZDEM YILMAZ | İlk ve Ortaokul Öğrencilerine Yönelik Robotic ve Kodlama Yaz Okulu Kazanımları | 5th International Instructional Technologies Teacher Education Symposium |
| 2017 | Ahmet FENERCİOĞLU, Mustafa ARPACIOĞLU, Yusuf AVŞAR | The Application of Linear Switched Reluctance Motor on Automatic Sliding Doors | ISMSIT 2017 |
| 2017 | Mehmet EKİCİ, Merve ŞEN KURT, Ahmet FENERCİOĞLU | Rotor Çubuk Malzemesinin 3 Fazlı Asenkron Motor Performansına Etkisi: Bir Derleme | VI. International Multidisiplinary Congress of Eurosian |
| 2017 | Merve ŞEN KURT, Ahmet FENERCİOĞLU, Mehmet AKAR, Ünal KURT | Double Cage Rotor Bar Structure Influences on Performance of the Single-Phase Induction Motor | Uluslararası Multidisipliner Çalışmalar ve Yenilikçi Teknolojiler Sempozyumu ISMSIT 2017 |
| 2017 | Mücahit SOYASLAN, Ahmet FENERCİOĞLU, Osman ELDOĞAN, YUSUF AVŞAR | Optimal Design and Analysis of an Outer Rotor Brushless Permanent Magnet DC Motor | ICCESEN-2017 |
| 2017 | Ahmet FENERCİOĞLU, Merve ŞEN KURT | Influences of Rotor Slot Distance on The Performance of Single Phase Induction Motor | ICAT 2017 |
| 2017 | Ahmet MERT, Fatih ONAY, Aydin AKAN | Empirical Mode Decomposition Based Feature Extraction for Intelligent Emotion Recognition | International Conference on Engineering Technologies (ICENTE) |
| 2017 | Ahmet Remzi ÖZCAN, Sarp ERTÜRK | Epileptic Seizure Prediction with Recurrent Convolutional Neural Networks | 2017 25th Signal Processing and Communications Applications Conference (SIU) |
| 2017 | Sinan ÖZCAN, Mustafa ÇOBAN, Gökhan GELEN | An Easy-to-Use Joystick Controller Design for Industrial Robots | International Conference on Advanced Technology and Science ICAT17 |
| 2017 | Atakan Yasin YEŞİLYURT, İLHAN TUNÇ, Mehmet Turan SÖYLEMEZ | Çok Ajanlı Sistemlerde İki Boyutlu Benzetim Programı: MUBEESIM | Otomatik Kontrol Ulusal Toplantısı TOK’17 |
| 2017 | Mehmet Onur GENÇ, Süleyman KONAKÇI, Necmettin KAYA | Elastomer Damper Spring Modeling for Automobile Clutch Disc | ICAMT Congress 2017 |
| 2017 | Çağlar İMER, Samet KARTAL, Mehmet Onur GENÇ | Stress Behavior Improvement of Automobile Flywheel Under High Centrifugal Forces | ICMAE 2017 |
| 2017 | Mehmet Onur GENÇ, Ahmet Koray PEHLİVAN | Advanced High Strength Steels Formability Investigation for Clutch Covers | ICAMT 2017 |
| 2017 | Cihat GÜL, Mehmet Onur GENÇ, Ali DURMUŞ | Numerical Estimating the Shock Strength of Automobile Clutch Disc Hub | AMRE 2017 |
| 2017 | Mehmet Onur GENÇ, Çağlar İMER | Graphite Flake Size Effects to Thermal Durability of Automobile Flywheel Under Forced Slippage | ICMAE 2017 |
| 2017 | Mehmet Onur GENÇ, Ahmet Koray PEHLİVAN | TWIP Çeliklerinin Debriyaj Kapağı Rijitlik Davranışlarının İncelenmesi | TUMTMK 2017 |
| 2017 | Murat PEKER | Unattended Object Detection Based On Blob Tracking | 2017 25th Signal Processing and Communications Applications Conference (SIU) |
| 2017 | Alper EMLEK, Murat PEKER, Kamil Fatih DİLAVER | Variable Window Size for Stereo Image Matching Based On Edge Information | 2017 International Artificial Intelligence and Data Processing Symposium (IDAP) |