logo
DEPARTMENT OF MECHANICAL ENGINEERING
Homepage / Research Groups and Publications
Research Groups and Publications


Publications (SCIE) (no particular order)


2024


  • Kucuk, M., Sener, R., & Surmen, A. (2024). Effectiveness of hydrogen enrichment strategy for Wankel engines in unmanned aerial vehicle applications at various altitudes. International Journal of Hydrogen Energy, 52, 1534-1549.
  • Kucuk, M., Surmen, A., & Sener, R. (2024). Combustion characteristics and performance of a Wankel engine for unmanned aerial vehicles at various altitudes. Fuel, 355, 129483.



2023

  • Canbolat, A. S., Bademlioglu, A. H., & Kaynakli, O. (2023). A modeling of electricity generation by using geothermal assisted organic Rankine cycle with internal heat recovery. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(1), 212-228.
  • Tanbay, T., & Durmayaz, A. (2023). Numerical modelling of groundwater radionuclide transport with finite difference-based method of lines. Journal of Radioanalytical and Nuclear Chemistry, 1-13.
  • Tanbay, T., Durmayaz, A. (2023). Multiobjective optimization of a pressurized water reactor cogeneration plant for nuclear hydrogen production. International Journal of Hydrogen Energy
  • Çelik, A. B. , Pulat, E. , Sökmen, K. F. , Balkan, Ç. & Coşkun, S. (2023). Açık dikey tip soğutucu teşhir dolabın faz değiştiren malzeme kullanılarak enerji verimliliğinin sayısal ve deneysel olarak incelenmesi . Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , 38 (3) , 1453-1466 . Retrieved from https://dergipark.org.tr/en/pub/gazimmfd/issue/75069/984026
  • Yildirim, A., Demirci, E., Karagöz, S., Özcan, Ş., & Yildiz, A. R. (2023). Experimental and numerical investigation of crashworthiness performance for optimal automobile structures using response surface methodology and oppositional based learning differential evolution algorithm. Materials Testing, 65(3), 346-363.
  • Öçal, A. E., Lekesiz, H., & Çetin, S. T. (2023). The Development of an Innovative Occupational Passive Upper Extremity Exoskeleton and an Investigation of Its Effects on Muscles. Applied Sciences, 13(11), 6763.


2022

  • Tanbay, T., & Durmayaz, A. (2022). Impact of combustion chamber wall heat loss on the energy, exergy, ecology, NOx emission based performance and multiobjective optimization of the precooled scimitar engine. International Journal of Hydrogen Energy.
  • Kucuk, M., Surmen, A., & Sener, R. (2022). Influence of Hydrogen Enrichment Strategy on Performance Characteristics, Combustion and Emissions of a Rotary Engine for Unmanned Aerial Vehicles (UAVs). Energies, 15(24), 9331.
  • Akbulut, M., & Ertas, A. H. (2022). Establishing reduced thermal mathematical model (RTMM) for a space equipment: An integrative review. Aircraft Engineering and Aerospace Technology.
  • Yilmaz, I. O., Yilmaz, M., & Saray, O. (2022). Deformation behavior and formability of friction stir processed DP600 steel. Open Chemistry, 20(1), 1467-1475.
  • Beyazoglu, E., Yuce, B. E., Ates, M., Yalindag, R., Sokmen, K. F., & Pulat, E. (2022). Cooling of Heated Blocks with Triangular Guide Protrusions Simulating Printed Circuit Boards. Sustainability, 14(23), 15856.
  • Büyükköprü, M., Uzunsoy, E., & Mouton, X. (2022). Implementation of semi-active suspension control methods in a full car model and a comparative study in terms of ride comfort and road holding. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 09544070221133153
  • Türkakar, G., & İsmail, H. O. Ş. (2023). Lityum iyon pillerin faz değişim maddesi ile ısıl yönetiminde kanat kullanımının sayısal incelenmesi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 38(2), 1105-1116.
  • Yuksel Yilmaz, A. N., Yunus, D. E., & Bedeloglu, A. C. (2022). Investigation of mechanical properties of hybrid stainless steel/acrylic and carbon fiber reinforced epoxy composite. Journal of Composite Materials, 00219983221106249.
  • Duzcan, A., & Kara, Y. A. (2022). Offshore wind energy potential analysis of Turkish Marmara and Aegean seas. International Journal of Environmental Science and Technology, 1-14.
  • Karatas, O. B., & Sokmen, K. F. (2022). Thermal optimization of intercellular distance in lithium-ion batteries and numerical analysis of the original honeycomb metal integrated battery pack. Journal of Energy Storage, 55, 105705.
  • Karaduman, A., Lekesiz, H., & Yildiz, A. R. (2022). Minimization of release bearing load loss in a clutch system for high-speed rotations using the differential evolution algorithm. Materials Testing, 64(11), 1627-1635.
  • Bhullar, S. K., Lekesiz, H., Karaca, A. A., Cho, Y., Willerth, S. M., & Jun, M. B. (2022). Characterizing the Mechanical Performance of a Bare-Metal Stent with an Auxetic Cell Geometry. Applied Sciences, 12(2), 910.
  • Canbolat, A. S., Bademlioglu, A. H., & Kaynakli, O. (2022). Thermohydraulic Performance Optimization of Automobile Radiators Using Statistical Approaches. Journal of Thermal Science and Engineering Applications, 14(5).
  • Tanbay, T., & Durmayaz, A. (2022). Energy, exergy and ecological analysis and multiobjective optimization of the hydrogen-fueled Scimitar engine with fixed nozzle geometry. International Journal of Hydrogen Energy.
  • Akgün-Tanbay, N., Campisi, T., Tanbay, T., Tesoriere, G., & Dissanayake, D. (2022). Modelling Road User Perceptions towards Safety, Comfort, and Chaos at Shared Space: The via Maqueda Case Study, Italy. Journal of Advanced Transportation, 2022.
  • Bhullar, S. K., Lekesiz, H., Karaca, A. A., Cho, Y., Willerth, S. M., & Jun, M. B. (2022). Characterizing the Mechanical Performance of a Bare-Metal Stent with an Auxetic Cell Geometry. Applied Sciences, 12(2), 910.
  • Gormez, G. & Ceper, B.A. (2022). Numerical analysis of a reactivity controlled compression ignition engine. Fuel, 307, 121819


2021

  • Düzcan, A., & Kara, Y. A. (2021). Exergoeconomic and exergoenvironmental analysis of a coal-fired thermal power plant. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(542), 
  • Aydinbakar, L., Takizawa, K., Tezduyar, T. E., & Kuraishi, T. (2021). Space–time VMS isogeometric analysis of the Taylor–Couette flow. Computational Mechanics, 67(5), 1515-1541.
  • Aydinbakar, L., Takizawa, K., Tezduyar, T. E., & Matsuda, D. (2021). U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization. Computational Mechanics, 67(3), 823-843.
  • Aslan, R., & Turan, O. (2021). An acoustic structure design supported by shear thickening fluid for sound absorption. Applied Acoustics, 182, 108257.
  • Ertas, A. H., & Akbulut, M. (2021). Experimental study on fatigue performance of resistance spot-welded sheet metals. The International Journal of Advanced Manufacturing Technology, 114(3), 1205-1218.
  • Düzcan, A., & Kara, Y. A. (2021). Investigation of the usage potential of the evacuated tube and the flat plate collectors to assist an absorption chiller. Sustainable Energy Technologies and Assessments, 47, 101437.
  • Düzcan, A., & Kara, Y. A. (2021). Assessment of wind energy potential: a case study. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-15.
  • Sundaram, E., Gunasekaran, M., Krishnan, R., Padmanaban, S., Chenniappan, S., & Ertas, A. H. (2021). Genetic algorithm based reference current control extraction based shunt active power filter. International Transactions on Electrical Energy Systems, 31(1), e12623.


2020

  • Turan, O. (2020). Numerical Investigation of Laminar Mixed Convection in a Square Cross-Sectioned Cylindrical Annular Enclosure. Journal of Thermal Engineering, 6(1), 1-15.
  • Aslan, R., & Turan, O. (2020). Gypsum-based sound absorber produced by 3D printing technology. Applied Acoustics, 161, 107162.
  • Turan, O., Yigit, S., & Chakraborty, N. (2020). Mixed convection of power-law fluids in cylindrical enclosures with a cold rotating top cover and a stationary heated bottom wall. Thermal Science and Engineering Progress, 100541.
  • Tanbay, T., Uca, M. B., & Durmayaz, A. (2020). Assessment of NOx emissions of the Scimitar engine at Mach 5 based on a thermodynamic cycle analysis. International Journal of Hydrogen Energy, 45(5), 3632-3640.
  • Sokmen, K. F., & Karatas, O. B. (2020). Investigation of Air Flow Characteristics in Air Intake Hoses using CFD and Experimental Analysis based on Deformation of Rubber Hose Geometry. Journal of Applied Fluid Mechanics, 13(3).
  • Sokmen, K. F., & Karatas, O. B. (2020). Experımental and Numerıcal Analysis of the Effect of Components on a Double-Sided PCB on LED Junction Temperature and Light Output Using CFD. Arabian Journal for Science and Engineering, 1-14.
  • Turan, O., Yigit, S., & Chakraborty, N. (2020). Mixed convection of power-law fluids in cylindrical enclosures with a cold rotating top cover and a stationary heated bottom wall. Thermal Science and Engineering Progress, 18, 100541.
  • Ganesan, R., Raajini, X. M., Nayyar, A., Sanjeevikumar, P., Hossain, E., & Ertas, A. H. (2020). BOLD: Bio-inspired optimized leader election for multiple drones. Sensors, 20(11), 3134.
  • SÖKMEN, K. F., & KARATAŞ, O. B. (2020). The Investigation of the Change of the Junction Temperature and Lighting Power of New Generation LED Modules through Fluid Mechanics  Depending on Variables such As Radiation  Via Number  Lens  Under the Effect of Various Currents  Ambient Temperatures. LIGHT AND ENGINEERING, 28(5), 106–115.
  • Tanbay, T., & Özgener, B. (2020). Fully meshless solution of the one dimensional multigroup neutron transport equation with the radial basis function collocation method. COMPUTERS  MATHEMATICS WITH APPLICATIONS, 79, 1266–1286.
  • Tanbay, T., & Durmayaz, A. (2020). Exergy and NOx Emission Based Ecological Performance Analysis of the Scimitar Engine. Journal of Engineering for Gas Turbines and Power, 142(8), 810081–8100810.


2019

  • Karaduman, A., Lekesiz, H., & Yildiz, A. (2019). Release Bearing Characteristic of Diaphragm Spring under Dynamical Condition (No. 2019-01-1424). SAE Technical Paper.
  • Yıldız, A. R., Kılıçarpa, U. A., Demirci, E., & Doğan, M. (2019). Topography and topology optimization of diesel engine components for light-weight design in the automotive industry. Materials Testing, 61(1), 27-34.
  • Demirci, E., & Yıldız, A. R. (2019). A new hybrid approach for reliability-based design optimization of structural components. Materials Testing, 61(2), 111-119.
  • Yigit, S., Battu, M., Turan, O., & Chakraborty, N. (2019). Free convection of power-law fluids in enclosures with partially heating from bottom and symmetrical cooling from sides. International Journal of Heat and Mass Transfer, 145, 118782.
  • He, R., Landowne, J., Currie, J., Amoah, J., Shi, W., Yunus, D., & Liu, Y. (2019). Three-dimensional printing of large objects with high resolution by scanning lithography. The International Journal of Advanced Manufacturing Technology, 105(10), 4147-4157.
  • Tanbay, T., & Ozgener, B. (2019). A Meshless Method Based on Symmetric RBF Collocation for Neutron Diffusion Problems. Acta Physica Polonica, A., 135(4).
  • Tanbay, T., & Ozgener, B. (2020). Fully meshless solution of the one-dimensional multigroup neutron transport equation with the radial basis function collocation method. Computers & Mathematics with Applications, 79(5), 1266-1286.
  • Altay, M., & Surmen, A. (2019). Effect of the relative positions of vehicular blockage on the smoke flow behaviour in a scaled tunnel. Fuel, 255, 115694.
  • Katı, H. D., & Gökdağ, H. (2019). Multi-step diferansiyel transform metodu ile uç kütle eklentili kirişlerin serbest titreşim analizi. Journal of the Faculty of Engineering & Architecture of Gazi University, 34(4).


2018

  • Demir, O., Ayhan, A. O., İriç, S., & Lekesiz, H. (2018). Evaluation of mixed mode I II criteria for fatigue crack propagation using experiments and modeling. Chinese Journal of Aeronautics, 31(7), 1525–1534.
  • Sekban, D. M., Akterer, S. M., Saray, O., Ma, Z. Y., & Purcek, G. (2018). Formability of friction stir processed low carbon steels used in shipbuilding. Journal of Materials Science & Technology, 34(1), 237-244.
  • Cotul, U., Parmak, E. D. S., Kaykilarli, C., Saray, O., Colak, O., & Uzunsoy, D. (2018). Development of High Purity, Few-Layer Graphene Synthesis by Electric Arc Discharge Technique. Acta Physica Polonica, A., 134(1).
  • Demirtas, H., Yilmaz, O., & Kanber, B. (2018). Controlling short circuiting, oxide layer and cavitation problems in electrochemical machining of freeform surfaces. Journal of Materials Processing Technology, 262, 585-596.
  • Kanber, B., & Güney, A. O. (2018). Experimental investigation of the effect of random distributed reinforcements on mechanical behaviour of reinforced rubbers. Sigma Journal of Engineering and Natural Sciences, 9(2), 257–268.
  • Kati, H. D., & Gokdag, H. (2018). Vibration analysis of a Timoshenko beam carrying 3D tip mass by using differential transform method. STRUCTURAL ENGINEERING AND MECHANICS, 65(4), 381-388.
  • Shi, W., He, R., Yunus, D. E., Yang, J., & Liu, Y. (2018). A Facile Way to Fabricate Transparent Superhydrophobic Surfaces. Journal of nanoscience and nanotechnology, 18(7), 5082-5087.
  • Sohrabi, S., Tan, J., Yunus, D. E., He, R., & Liu, Y. (2018). Label-free sorting of soft microparticles using a bioinspired synthetic cilia array. Biomicrofluidics, 12(4), 042206.
  • Ülker, H., Baykara, C., & Özsoy, C. (2018). PIL simulations of an FWUAV under windy conditions. Aircraft Engineering and Aerospace Technology, 90(2), 461-470.
  • Güler, T., Demirci, E., Yıldız, A. R., & Yavuz, U. (2018). Lightweight design of an automobile hinge component using glass fiber polyamide composites. Materials Testing, 60(3), 306-310.
  • Demirci, E., & Yıldız, A. R. (2018). An experimental and numerical investigation of the effects of geometry and spot welds on the crashworthiness of vehicle thin-walled structures. Materials Testing, 60(6), 553-561.
  • Demirci, E., & Yıldız, A. R. (2018). An investigation of the crash performance of magnesium, aluminum and advanced high strength steels and different cross-sections for vehicle thin-walled energy absorbers. Materials Testing, 60(7-8), 661-668.


2017

  • Yildiz, B. S., & Lekesiz, H. (2017). Fatigue based structural optimisation of vehicle components. International Journal of Vehicle Design, 73(1/2/3), 54–62.
  • Lekesiz, H., Bhullar, S. K., Karaca, A. A., & Jun, M. (2017). Mechanical characterization of auxetic stainless steel thin sheets with reentrant structure. Smart Materials and Structures, 26(8), 85022–0.
  • Bhullar, S. K., Rana, D., Lekesiz, H., Bedeloğlu, A., Ko, J., Cho, Y., … Ramalingam, M. (2017). Design and fabrication of auxetic PCL nanofiber membranes for biomedical applications. Materials Science S Engineering C-Materials for Biological Applications, 81, 334–340.
  • Sarigul, S., Salci, H., Lekesiz, H., Dogan, S., Özcan, R., Gorgul, O. S., & Aksoy, K. (2017). Contribution of the xenograft bone plate screw system in lumbar transpedicular stabilization An in vivo study in dogs. Asian Journal of Neurosurgery, 12(3), 494–0.
  • Demirtas, H., Yilmaz, O., & Kanber, B. (2017). A simplified mathematical model development for the design of free-form cathode surface in electrochemical machining. Machining Science and Technology, 21(1), 157-173.
  • Katı, H. D., & Gökdağ, H. (2017). Free vibration of a Timoshenko beam carrying three dimensional tip mass: Analytical solution and experimental modal testing. Materials Testing, 59(6), 591-597.
  • Turan, O., Yigit, S., & Chakraborty, N. (2017). Critical condition for Rayleigh-Bénard convection of Bingham fluids in rectangular enclosures. International Communications in Heat and Mass Transfer, 86, 117-125.
  • Turan, O., Yigit, S., & Chakraborty, N. (2017). Numerical investigation of mixed convection of Bingham fluids in cylindrical enclosures with heated rotating top wall. International Journal of Heat and Mass Transfer, 108, 1850-1869.
  • Colakoglu, M., Tanbay, T., Durmayaz, A., & Sogut, O. S. (2016). Effect of heat leakage on the performance of a twin-spool turbofan engine. International Journal of Exergy, 19(2), 173-198.
  • He, R., Yunus, D., Uhl, C., Shi, W., Sohrabi, S., & Liu, Y. (2017). Fabrication of circular microfluidic channels through grayscale dual-projection lithography. Microfluidics and Nanofluidics, 21(1), 13.
  • Yunus, D. E., Sohrabi, S., He, R., Shi, W., & Liu, Y. (2017). Acoustic patterning for 3D embedded electrically conductive wire in stereolithography. Journal of Micromechanics and Microengineering, 27(4), 045016.
  • Yunus, D. E., He, R., Shi, W., Kaya, O., & Liu, Y. (2017). Short fiber reinforced 3d printed ceramic composite with shear induced alignment. Ceramics International, 43(15), 11766-11772.
  • Shi, W., Wang, S., Maarouf, A., Uhl, C. G., He, R., Yunus, D., & Liu, Y. (2017). Magnetic particles assisted capture and release of rare circulating tumor cells using wavy-herringbone structured microfluidic devices. Lab on a Chip, 17(19), 3291-3299
  • Karagöz, S., & Yıldız, A. R. (2017). A comparison of recent metaheuristic algorithms for crashworthiness optimisation of vehicle thin-walled tubes considering sheet metal forming effects. International Journal of Vehicle Design, 73(1-3), 179-188.
  • Ülker, H., Baykara, C., & Özsoy, C. (2017). Design of MPCs for a fixed wing UAV. Aircraft Engineering and Aerospace Technology, 89(6), 893-901.


2016

  • Kara, Y. (2016). Diurnal performance analysis of phase change material walls. Applied Thermal Engineering, 102, 1–8.
  • Betul Sultan, Y., Lekesiz, H., & Ali Riza, Y. (2016). Structural design of vehicle components using gravitational search and charged system search algorithms. Materials Testing, 58(1), 79–81.
  • Saray, O. (2016). Biaxial deformation behavior and formability of precipitation hardened ultra-fine grained (UFG) Cu–Cr–Zr alloy. Materials Science and Engineering: A, 656, 120-129.
  • Uzunsoy, E., & Erkilic, V. (2016). Development of a trajectory following vehicle control model. Advances in Mechanical Engineering, 8(5), 1687814016650832.
  • Sökmen, K. F., Yamankaradeniz, N., & Cosşkun, S. (2016). Investigation of heat transfer typer in an automobile fog lamp with computational fluid dynamic analysis.Light & Engineering, 24(4).
  • Sökmen, K. F., Yürüklü, E., & Yamankaradeniz, N. (2016). Computational thermal analysis of cylindrical fin design parameters and a new methodology for defining fin structure in LED automobile headlamp cooling applications. Applied Thermal Engineering, 94, 534-542.
  • Yamankaradeniz, N., Sokmen, F. K., Coskun, S., Kaynakli, O., & Pastakkaya, B. (2016). Performance analysis of a re-circulating heat pump dryer. Thermal Science, 20(1), 267-277.
  • Sohrabi, S., Yunus, D. E., Xu, J., Yang, J., & Liu, Y. (2016). Characterization of nanoparticle binding dynamics in microcirculation using an adhesion probability function. Microvascular research, 108, 41-47.
  • Yunus, D. E., Shi, W., Sohrabi, S., & Liu, Y. (2016). Shear induced alignment of short nanofibers in 3D printed polymer composites. Nanotechnology, 27(49), 495302.
  • Bayrak, O., Ionita, M., Demirci, E., & Silberschmidt, V. V. (2016). Optical properties of graphene-based materials in transparent polymer matrices. Applied Physics Letters, 109(8), 081905.
  • Bayrak, O., Ionita, M., Demirci, E., & Silberschmidt, V. V. (2016). Effect of morphological state of graphene on mechanical properties of nanocomposites. Journal of materials science, 51(8), 4037-4046.
  • Yıldız, A. R., Kurtuluş, E., Demirci, E., Yıldız, B. S., & Karagöz, S. (2016). Optimization of thin-wall structures using hybrid gravitational search and Nelder-Mead algorithm. Materials Testing, 58(1), 75-78.
  • Yıldız, A. R., Kurtuluş, E., Demirci, E., Yıldız, B. S., & Karagöz, S. (2016). Optimization of thin-wall structures using hybrid gravitational search and Nelder-Mead algorithm. Materials Testing, 58(1), 75-78.


2015

  • Aktarer, S. M., Sekban, D. M., Saray, O., Kucukomeroglu, T., Ma, Z. Y., & Purcek, G. (2015). Effect of two-pass friction stir processing on the microstructure and mechanical properties of as-cast binary Al–12Si alloy. Materials Science and Engineering: A, 636, 311-319.
  • Sekban, D. M., Saray, O., Aktarer, S. M., Purcek, G., & Ma, Z. Y. (2015). Microstructure, mechanical properties and formability of friction stir processed interstitial-free steel. Materials Science and Engineering: A, 642, 57-64.
  • Yavuz, M. M., & Kanber, B. (2015). On the usage of tetrahedral background cells in nodal integration of RPIM for 3D elasto-static problems. International Journal of Computational Methods, 12(06), 1550036.
  • Sokmen, K. F., Pulat, E., Yamankaradeniz, N., & Coskun, S. (2015). Led junction adn heatsink numbe rcalculation with computational fluids dynamic (CFD). ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 35(1), 69-75.
  • Cuhadaroglu, B., & Turan, O. (2015). Numerical analysis of flow around porous rectangular cylinders with uniform injection or suction. Progress in Computational Fluid Dynamics, an International Journal, 15(2), 123-134.
  • Tanbay, T., Durmayaz, A., & Sogut, O. S. (2015). Exergy–based ecological optimisation of a turbofan engine. International Journal of Exergy, 16(3), 358-381.
  • Haciyakupoglu, S., Esen, A. N., Erenturk, S., Okka, M., Genceli, M., Mercimek, M., ... & Camtakan, Z. (2015). Determining distribution of heavy metal pollution in terms of ecological risk levels in soil of industrially intensive areas around Istanbul. Toxicological & Environmental Chemistry, 97(1), 62-75.


2014

  • Kara, Y. (2014). A Simplified Three Zone Model for Designing Shell and Tube Refrigerant Condensers. Isı Bilimi ve Tekniği Dergisi-Journal of Thermal Science and Technology,
  • Kara,Y. Kurnuç, A. (2014). Energy evaluation of a phase change material wall covered with novel triple glass. Isı Bilimi ve Tekniği Dergisi-Journal of Thermal Science and Technology,
  • Lekesiz, H. (2014). Reliability Estimation for Single unit Ceramic Crown Restorations. Journal of Dental Research, 93(9), 923–928.
  • Purcek, G., Yanar, H., Saray, O., Karaman, I., & Maier, H. J. (2014). Effect of precipitation on mechanical and wear properties of ultrafine-grained Cu–Cr–Zr alloy. Wear, 311(1-2), 149-158.
  • Saray, O., Purcek, G., Karaman, I., & Maier, H. J. (2014). Improvement of formability of ultrafine-grained materials by post-SPD annealing. Materials Science and Engineering: A, 619, 119-128.
  • Sokmen, K. F., Pulat, E., Yamankaradeniz, N., & Coskun, S. (2014). Thermal computations of temperature distribution and bulb heat transfer in an automobile headlamp. Heat and mass transfer, 50(2), 199-210.
  • Turan, O., Poole, R. J., & Chakraborty, N. (2014). Influences of boundary conditions on laminar natural convection of Bingham fluids in rectangular enclosures with differentially heated side walls. Heat Transfer Engineering, 35(9), 822-849.
  • Tanbay, T., & Ozgener, B. (2014). A comparison of the meshless RBF collocation method with finite element and boundary element methods in neutron diffusion calculations. Engineering Analysis with Boundary Elements, 46, 30-40.


2013

  • Lekesiz, H., Katsube, N., Seghi, R., & Rokhlin, S. (2013). Effective spring stiffness for a periodic array of interacting coplanar penny shaped cracks at an interface between two dissimilar isotropic materials. International Journal of Solids and Structures, 50(18), 2817–2828.
  • Lekesiz, H. (2013). On the Complex Stress Intensity Factor for Split type Interface Cracks Based on an Approximate Method. International Journal of Fracture, 180(2), 275–282.
  • Lekesiz, H., Katsube, N., Rokhlin, S., & Seghi, R. (2013). The stress intensity factors for a periodic array of interacting coplanar penny shaped cracks. International Journal of Solids and Structures, 50(1), 186–200.
  • Saray, O., Purcek, G., Karaman, I., & Maier, H. J. (2013). Formability of ultrafine-grained interstitial-free steels. Metallurgical and Materials Transactions A, 44(9), 4194-4206.
  • Demirhan, N., & Kanber, B. (2013). Finite element analysis of frictional contacts of FGM coated elastic members#. Mechanics Based Design of Structures and Machines, 41(4), 383-398.
  • Bozkurt, O. Y., Kanber, B., & AŞIK, M. Z. (2013). Assessment of RPIM shape parameters for solution accuracy of 2D geometrically nonlinear problems. International Journal of Computational Methods, 10(03), 1350003.
  • Gökdağ, H. (2013). Comparison of ABC, CPSO, DE and GA Algorithms in FRF Based Structural Damage Identification. Materials Testing, 55(10), 796-802.
  • Gökdağ, H. (2013). A crack identification approach for beam-like structures under moving vehicle using particle swarm optimization. Materials Testing, 55(2), 114-120.
  • Isin, O., & Uzunsoy, E. (2013). Predicting the exhaust emissions of a spark ignition engine using adaptive neuro-fuzzy inference system. Arabian Journal for Science and Engineering, 38(12), 3485-3493.
  • Turan, O., Sachdeva, A., Poole, R. J., & Chakraborty, N. (2013). Aspect ratio and boundary conditions effects on laminar natural convection of power-law fluids in a rectangular enclosure with differentially heated side walls. International Journal of Heat and Mass Transfer, 60, 722-738.
  • Turan, O., Lai, J., Poole, R. J., & Chakraborty, N. (2013). Laminar natural convection of power-law fluids in a square enclosure submitted from below to a uniform heat flux density. Journal of Non-Newtonian Fluid Mechanics, 199, 80-95.
  • Turan, O., Lai, J., Poole, R. J., & Chakraborty, N. (2013). Laminar natural convection of power-law fluids in a square enclosure submitted from below to a uniform heat flux density. Journal of Non-Newtonian Fluid Mechanics, 199, 80-95.
  • Tanbay, T., & Ozgener, B. (2013). A numerical method for resonance integral calculations. Kerntechnik, 78(3), 220-228.
  • Balbay, A., Şahin, Ö., & Ülker, H. (2013). Modeling of convective drying kinetics of pistachio kernels in a fixed bed drying system. Thermal science, 17(3), 839-846.
  • Balbay, A., Ülker, H., Sahin, Ö., Shemirani, M. M., Saghir, M. Z., Gedik, E., ... & Aggoune, S. (2013). An Experimental Study on Drying of Pistacia Terebinthus in a Fixed Bed Dryer. FDMP: Fluid Dynamics & Materials Processing, 9(1), 1-10.


2012

  • Kara, Y. A., & Kurnuç, A. (2012). Performance of coupled novel triple glass unit and PCM wall. Applied Thermal Engineering, 35, 243-246.
  • Kurnuç Seyhan , A., & Kara, Y. (2012). Performance of coupled novel triple glass and phase change material wall in the heating season  An experimental study. SOLAR ENERGY, 86(9), 2432–2442.
  • Kara, M., Boydas, M. G., Kara, Y. A., & Ozturk, I. (2012). The effect of moisture content on the thermal properties of red lentil seeds. Transactions of the ASABE, 55(6), 2301-2306.
  • Saray, O., Purcek, G., Karaman, I., & Maier, H. J. (2012). Impact toughness of ultrafine-grained interstitial-free steel. Metallurgical and Materials Transactions A, 43(11), 4320-4330.
  • Purcek, G., Saray, O., Nagimov, M. I., Nazarov, A. A., Safarov, I. M., Danilenko, V. N., ... & Mulyukov, R. R. (2012). Microstructure and mechanical behavior of UFG copper processed by ECAP following different processing regimes. Philosophical Magazine, 92(6), 690-704.
  • Purcek, G., Saray, O., Karaman, I., & Maier, H. J. (2012). High strength and high ductility of ultrafine-grained, interstitial-free steel produced by ECAE and annealing. Metallurgical and Materials Transactions A, 43(6), 1884-1894.
  • Gökdağ, H., & Yildiz, A. R. (2012). Structural damage detection using modal parameters and particle swarm optimization. Materials Testing, 54(6), 416-420.
  • Istif, I., Isin, O., Uzunsoy, E., & Uzunsoy, D. (2012). Non-linear modelling of PM brake lining wear behaviour. Materials Testing, 54(1), 45-48.
  • Turan, O., Poole, R. J., & Chakraborty, N. (2012). Influences of boundary conditions on laminar natural convection in rectangular enclosures with differentially heated side walls. International Journal of Heat and Fluid Flow, 33(1), 131-146.
  • Turan, O., Chakraborty, N., & Poole, R. J. (2012). Laminar Rayleigh-Bénard convection of yield stress fluids in a square enclosure. Journal of Non-Newtonian Fluid Mechanics, 171, 83-96.
  • Çuhadaroğlu, B., & Turan, O. (2012). Numerical study on heat transfer between turbulent flow and porous rectangular cylinders with uniform injection or suction. Heat Transfer Engineering, 33(15), 1232-1245.
  • Turan, O., Sachdeva, A., Poole, R. J., & Chakraborty, N. (2012). Laminar natural convection of power-law fluids in a square enclosure with differentially heated sidewalls subjected to constant wall heat flux. Journal of Heat Transfer, 134(12), 122504.
  • Turan, O., Poole, R. J., & Chakraborty, N. (2012). Boundary condition effects on natural convection of Bingham fluids in a square enclosure with differentially heated horizontal walls. Computational Thermal Sciences: An International Journal, 4(1).