Yayınlar

2024

Arslanhan, M., & Parmak, E. D. Ş. (2024). Structure, wettability and photocatalytic activity of graphene doped multi-walled carbon nanotubes/titanium dioxide hybrid coatings., 140149788, Thin Solid Films. https://doi.org/10.1016/j.tsf.2023.140149
Borand, G., Akçamlı, N., & Uzunsoy, D. (2024). Production of few-layered graphene reinforced copper by powder metallurgy. Fullerenes, Nanotubes and Carbon Nanostructures, 32(4), 394-413. https://doi.org/10.1080/1536383X.2023.2290052
Kalkan, İ. H., Hızlı, İ. G., Dizdar, K. C., Kahruman, C., & Dispinar, D. (2024). Statistical Distribution of Si Phases at Different Sr Levels in AlSi9 Alloys. Metallography, Microstructure, and Analysis, 13(1), 130-144. https://doi.org/10.1007/s13632-023-01035-0
Kaykilarli, C., Uzunsoy, D., & Yeprem, H. A. (2024). Role of process control agent in the production of Al2O3-reinforced titanium matrix composites. Ceramics International, 50(9), 16452-16462. https://doi.org/10.1016/j.ceramint.2024.02.130
Öztürk, O., Aydın, M., Gökcepınar, Ö. F., Ilbeyli, H. M., Korkmaz, H. G., Yapan, Y. F., ... & Türköz, M. (2024). Enhancing formability of Ti-6Al-4V cylindrical cups by pulsating hydroforming process: Experimental, numerical and microstructural investigations. Engineering Science and Technology, an International Journal, 50, 101606. https://doi.org/10.1016/j.jestch.2023.101606
Baloğlu, A. R., Tekin, M., & Kotan, H. (2024). Geleneksel sinterleme ve spark plazma sinterleme yöntemlerinin nanokristal yapılı CoCrFeNi yüksek entropili alaşımın mikroyapısal özellikleri ve sertliği üzerine etkilerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 39(4), 2515-2524. https://doi.org/10.17341/gazimmfd.1344942
Uludag, M., & Ulkir, O. (2024). Optimizing surface roughness in soft pneumatic gripper fabricated via FDM: experimental investigation using Taguchi method. Multidiscipline Modeling in Materials and Structures, 20(1), 211-225. DOI 10.1108/MMMS-09-2023-0313
Şenyurt, B., Ağaoğulları, D., & Akçamlı, N. Al‐Si‐Cu‐Mg Matrix Composites with Graphene: PM‐based Production, Microstructural and Mechanical Properties. Advanced Engineering Materials. https://doi.org/10.1002/adem.202400046
DOGAN, H. Y., TERZİOĞLU, P., & DUMAN, Ş. (2024). Polylactic acid/akermanite biocomposite films for food packaging applications. Journal of Polymer Research, 31(7), 195. https://doi.org/10.1007/s10965-024-04033-0
Berksoy‐Yavuz, A., Kaya, M. Y., Yalcin, E., Gozuacik, N. K., & Mensur, E. (2024). Effect of texture on ultra‐high strain behavior in eco‐friendly NBT‐0.25 ST ceramics using NBT template. Journal of the American Ceramic Society, 107(8), 5502-5511. https://doi.org/10.1111/jace.19834
Eken, T. Y., Kaykilarli, C., Kucukelyas, B., & Tabakcioglu, M. B. (2024). Electromagnetic Shielding Effectiveness and Impact Test Performance of Carbon Fiber Reinforced Polymer Composites with Hematite and Goethite. Macromolecular Materials and Engineering, 309(2), 2300271. https://doi.org/10.1002/mame.202300271
Kaçar, N., Lökçü, E., Çayirli, M., Özden, R. C., Coskun, S., Toparli, C., ... & Anik, M. (2024). Synthesis of N‐Doped Graphene Photo‐Catalyst for Photo‐Assisted Charging of Li‐Ion Oxygen Battery. Global Challenges, 8(1), 2300166. https://doi.org/10.1002/gch2.202300166
Colak, O. U., Birkan, B., Bakbak, O., Acar, A., & Uzunsoy, D. (2023). Functionalized graphene–epoxy nanocomposites: experimental investigation of viscoelastic and viscoplastic behaviors. Mechanics of Time-Dependent Materials, 27(1), 185-205. https://doi.org/10.1007/s11043-021-09530-z

2023

Eroğlu, M., & Şam Parmak, E. D. (2023). A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers. (7), 1163-1176.37, Journal of Adhesion Science and Technology. https://doi.org/10.1080/01694243.2022.2043056
Celtik, C., Ayhan, I. I., & Yurekturk, Y. (2023). Effect of Double Austenitization and Pre-Annealing Heat Treatment on the Microstructural and Mechanical Properties of QT 41Cr4 Steel. Transactions of the Indian Institute of Metals, 76(10), 2845-2855. https://doi.org/10.1007/s12666-023-02975-5
Yürektürk, Y. (2023). Characterization of surface modified Ti-6Al-4V alloy by hot-dip aluminizing (HDA) and diffusion annealing. Journal of the Faculty of Engineering and Architecture of Gazi University, 38(1), 309-318. DOI: 10.17341/gazimmfd.1009881
Kaykılarlı, C., Yeprem, H. A., & Uzunsoy, D. (2023). Mechanical and tribological characterization of graphene nanoplatelets/Al2O3 reinforced epoxy hybrid composites. Fullerenes, Nanotubes and Carbon Nanostructures, 31(5), 435-447. https://doi.org/10.1080/1536383X.2023.2173740
Kaboglu, C., Eken, T. Y., & Guney, S. (2023). Effect of curvature and stacking sequence on flexural strength in glass fiber reinforced composites. Materials Testing, 65(8), 1273-1280. https://doi.org/10.1515/mt-2022-0348
Uludag, M., Ulkir, O., Ertugrul, I., & Kaplanoglu, E. (2023). Design, fabrication, and experiments of a soft pneumatic gripper with closed-loop position control. Journal of Testing and Evaluation, 51(5), 2909-2921. https://doi.org/10.1520/JTE20220378
Duman, Ş., & Küçük, M. (2023). Cryogenic milling-based keratin microparticle production from Anatolian goat fibers and their structural, chemical and thermal properties. Textile Research Journal, 93(5-6), 1347-1357. https://doi.org/10.1177/00405175221131334
Yalcin, E., Gözüaçık, N. K., Alkoy, S., Sarı, H. A., Kaya, M. Y., Öncel, Ç., & Menşur, E. (2023). Characterization of 1–3 piezocomposites from PNN-PZT piezoceramics. Sensors and Actuators A: Physical, 357, 114389. https://doi.org/10.1016/j.sna.2023.114389
Kaçar, N., Çayirli, M., Özden, R. C., Lökçü, E., & Anik, M. (2023). Photocatalytic Efficiency of g-C3N4/Graphene Nanocomposites in the Photo-Assisted Charging of the Li-Ion Oxygen Battery. ACS omega, 8(48), 46227-46235. DOI: 10.1021/acsomega.3c07546
Sarıkaya, S., Ipekci, H. H., Kotan, H., & Uzunoglu, A. (2023). Inkjet printing of highly dispersed, shortened, and defect-rich MWCNTs to construct flexible electrochemical sensors for the detection of bisphenol A in milk samples. Carbon, 214, 118362. https://doi.org/10.1016/j.carbon.2023.118362
Tekin, M., Muhaffel, F., Kotan, H., & Baydoğan, M. (2023). Indentation creep behavior of Fe–8Ni–x Zr oxide dispersion strengthened alloys. Materials Testing, 65(9), 1405-1415. https://doi.org/10.1515/mt-2023-0030
Kotan, H., Tekin, M., Bayatlı, A., Bayrak, K. G., Kocabaş, M., & Ayas, E. (2023). Effect of in-situ formed oxide and carbide phases on microstructure and corrosion behavior of Zr/Y doped CoCrFeNi high entropy alloys prepared by mechanical alloying and spark plasma sintering. Intermetallics, 162, 107998. https://doi.org/10.1016/j.intermet.2023.107998
Tekin, M., Muhaffel, F., Kotan, H., & Baydoğan, M. (2023). Wear behavior of in-situ oxide dispersion strengthened Fe-8Ni alloy with Zr additions. Journal of Metals, Materials and Minerals, 33(1), 1-7. https://doi.org/10.55713/jmmm.v33i1.1568,
Öztürk, O., Korkmaz, H. G., Ataş, G., Aydin, M., Türköz, M., Toros, S., ... & Halkaci, H. S. (2023). Formability improvement in Ti–6Al–4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations. The International Journal of Advanced Manufacturing Technology, 124(7), 2903-2918.
Yapan, Y. F., Öztürk, O., Türköz, M., Dilmeç, M., Livatyalı, H., Halkacı, H. S., & Kotan, H. (2023). Microstructural characterization of improved formability of Ti-6Al-4V sheet by pulsating hydraulic bulging at room temperature. Journal of Materials Engineering and Performance, 32(14), 6258-6269. https://doi.org/10.1007/s11665-022-07550-5
Kaya, M. Y., & Alkoy, S. (2022). Design, Modeling and Fabrication of a Novel Class V Flextensional Transducer: The Sea-Shell. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 70(1), 64-71. DOI: 10.1109/TUFFC.2022.3224076

2022

Şenyurt, B., Küçükelyas, B., Bellek, M., Kavak, S., Borand, G., Uzunsoy, D., ... & Akçamlı, N. (2022). Few-layered graphene reinforced Al-10 wt% Si-2 wt% Cu matrix composites. Journal of Materials Research and Technology, 21, 486-501. https://doi.org/10.1016/j.jmrt.2022.09.049
Borand, G., & Uzunsoy, D. (2022). Fabrication of functionally graded few-layered graphene reinforced Al-4.5 Cu alloy by powder metallurgy. Journal of Alloys and Compounds, 923, 166348. https://doi.org/10.1016/j.jallcom.2022.166348
Celtik, C., Yurekturk, Y., Gecu, R., Kaboglu, C., & Muhaffel, F. (2022). Surface characteristics of plasma electrolytic oxidation coatings on Cp-Ti and hot-dip aluminised Cp-Ti. Transactions of the IMF, 100(3), 159-165. https://doi.org/10.1080/00202967.2022.2058108
Yürektürk, Y. (2022). Effect of diffusion annealing on duplex coated pure titanium produced by hot-dip aluminizing and micro-arc oxidation. Surface and Coatings Technology, 433, 128170. https://doi.org/10.1016/j.surfcoat.2022.128170
Kaboglu, C., Eken, T. Y., & Yurekturk, Y. (2022). Impact performances and failure modes of glass fiber reinforced polymers in different curvatures and stacking sequences. Journal of Composite Materials, 56(7), 1123-1138. https://doi.org/10.1177/00219983211059
Kaboglu, C., & Ferik, E. (2022). Effects of carbon nanotubes on mechanical behavior of fiber reinforced composite under static loading. Materials Testing, 64(2), 294-302. https://doi.org/10.1515/mt-2021-2024
Kaboglu, C., & Ferik, E. (2022). The effect carbon nanotube on three-point bending behavior of fiber reinforced composite.
Liu, H., Liu, J., Kaboglu, C., Zhou, J., Kong, X., Li, S., ... & Dear, J. P. (2022). Modelling the quasi-static flexural behaviour of composite sandwich structures with uniform-and graded-density foam cores. Engineering Fracture Mechanics, 259, 108121. https://doi.org/10.1016/j.engfracmech.2021.108121
Selvi, E., Muhaffel, F., Yürektürk, Y., Vanlı, A. S., & Baydoğan, M. (2022). Influence of electrolyte compositions and electrical parameters on thermal properties of micro-arc oxidized AZ91 alloy. Journal of Materials Engineering and Performance, 1-12. https://doi.org/10.1007/s11665-021-06292-0
Kaykılarlı, C., Küçükelyas, B., Akçamlı, N., Uzunsoy, D., & Cansever, N. (2022). Processing and Characterization of Al-4Cu Matrix Composites Reinforced with Few Layered Graphene. Transactions of the Indian Institute of Metals, 75(9), 2379-2388. https://doi.org/10.1007/s12666-022-02606-5
Kaykılarlı, C., Altınışık, Z., Kılıç, E. C., Uzunsoy, D., & Yeprem, H. A. (2022). Aluminium Oxide (Al2O3)-Few Layer Graphene (FLG) Reinforced Aluminium Hybrid Composites. Composites Theory and Practice, 22(2), 72-78.
Kaya, M. Y., & Alkoy, S. (2022). Design, Modeling and Fabrication of a Novel Class V Flextensional Transducer: The Sea-Shell. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 70(1), 64-71. DOI: 10.1109/TUFFC.2022.3224076
Parmak, E. D. S. (2022). Fabrication of microstructured polymers by a simple biotemplate embossing method and their characterization. (3), 246-251.58, Materials Testing. https://doi.org/10.3139/120.110841
Kalemtas, A., Kocer, H. B., Aydin, A., Terzioglu, P., & Aydin, G. (2022). Mechanical and antibacterial properties of ZnO/chitosan bio-composite films. Journal of Polymer Engineering, 42(1), 35-47. https://doi.org/10.1515/polyeng-2021-0143
Akçamlı, N., Şenyurt, B., Gökçe, H., & Ağaoğulları, D. (2022). Powder metallurgical fabrication of graphene reinforced near-eutectic Al-Si matrix composites: Microstructural, mechanical and electrochemical characterization. Engineering Science and Technology, an International Journal, 31, 101052. https://doi.org/10.1016/j.jestch.2021.08.009
Tekin, M., & Kotan, H. (2022). Microstructural Characterization and Hardness Study of Nanostructured CoCrFeNi High Entropy Alloys with Dual Effect of Y and Nano-Sized Y2O3 Additions. Transactions of the Indian Institute of Metals, 75(9), 2389-2394. https://doi.org/10.1007/s12666-022-02615-4
Polat, G., Teki̇n, M., & Kotan, H. (2022). Role of yttrium addition and annealing temperature on thermal stability and hardness of nanocrystalline CoCrFeNi high entropy alloy. Intermetallics, 146, 107589. https://doi.org/10.1016/j.intermet.2022.107589
Tekin, M., Polat, G., & Kotan, H. (2022). An investigation of abnormal grain growth in Zr doped CoCrFeNi HEAs through in-situ formed oxide phases. Intermetallics, 146, 107588. https://doi.org/10.1016/j.intermet.2022.107588
Uzunoglu, A., Kotan, H., Karaagac, R., & Ipekci, H. H. (2022). Preparation of defect-rich, N-doped activated carbons via high-energy ball milling and investigation of their electrochemical performances towards hydrogen peroxide sensing. Applied Nanoscience, 12(5), 1475-1489. https://doi.org/10.1007/s13204-021-02321-5
Bulut, B., & Duman, Ş. (2022). Evaluation of mechanical behavior, bioactivity, and cytotoxicity of chitosan/akermanite-TiO2 3D-printed scaffolds for bone tissue applications. Ceramics International, 48(15), 21378-21388. https://doi.org/10.1016/j.ceramint.2022.04.104
Duman, Ş., & Küçük, M. (2022). Production and characterization of keratin microparticles obtained from wool fibers by cryogenic milling method. Particulate Science and Technology, 40(8), 933-941. https://doi.org/10.1080/02726351.2022.2028321
Mutlu, B., Çaylak, S., &Duman, Ş. (2022). Incorporation of cerium oxide into hydroxyapatite/chitosan composite scaffolds for bone repair. Processing and Application of Ceramics, 16(3), 207-217. https://doi.org/10.2298/PAC2203207M
Boz, M., Kaya, M. Y., Özdemir, Ö., & Alkoy, S. (2022). Design, finite element analysis, fabrication and electroacoustic characterization of transducer arrays from piezoceramics with hollow cylindrical shell form. Ferroelectrics, 586(1), 93-101. https://doi.org/10.1080/00150193.2021.2014262
Berksoy-Yavuz, A., Kaya, M. Y., Avcı, T., Cakırbas, G., & Menşur, E. (2022). Fabrication of 0.94 NBT–0.06 BT textured ceramics using plate-like NBT templates and their electrical properties. Journal of Materials Science: Materials in Electronics, 1-14.
Küçükelyas, B., Safaltın, Ş., Sam, E. D., & Gurmen, S. (2022). Synthesis, structural and magnetic characterization of spherical high entropy alloy CoCuFeNi particles by hydrogen reduction assisted ultrasonic spray pyrolysis. International Journal of Materials Research, 113(4), 306-315. https://doi.org/10.1515/ijmr-2021-8519
Lokcu, E., Kaçar, N., Cayirli, M., Ozden, R. C., & Anik, M. (2022). Photoassisted charging of Li-ion oxygen batteries using g-C3N4/rGO nanocomposite photocatalysts. ACS Applied Materials & Interfaces, 14(30), 34583-34592. https://doi.org/10.1021/acsami.2c05607

2021

Borand, G., Akçamlı, N., & Uzunsoy, D. (2021). Structural characterization of graphene nanostructures produced via arc discharge method. Ceramics International, 47(6), 8044-8052. https://doi.org/10.1016/j.ceramint.2020.11.158
Colak, O. U., Uzunsoy, D., Bahlouli, N., & Francart, C. (2021). Experimental investigation of oligo cyclic compression behavior of pure epoxy and graphene-epoxy nanocomposites. Polymer Bulletin, 78, 6935-6952. https://doi.org/10.1007/s00289-020-03453-4
Gecim, G., Aydin, G., Tavsanoglu, T., Erkoc, E., & Kalemtas, A. (2021). Review on extraction of polyhydroxyalkanoates and astaxanthin from food and beverage processing wastewater. Journal of Water Process Engineering, 40, 101775. https://doi.org/10.1016/j.jwpe.2020.101775
Aydin, G., Terzioğlu, P., Öğüt, H., & Kalemtas, A. (2021). Production, characterization, and cytotoxicity of calcium phosphate ceramics derived from the bone of meagre fish, Argyrosomus regius. Journal of the Australian Ceramic Society, 57, 37-46. https://doi.org/10.1007/s41779-020-00513-w
Kaboglu, C., Liu, J., Liu, H., Russo, P., Simeoli, G., Lopresto, V., ... & Maharaj, C. (2021). The effect of a coupling agent on the impact behavior of flax fiber composites. Journal of Engineering Materials and Technology, 143(3), 031008. https://doi.org/10.1115/1.4050637
Uludağ, M. (2021). Experimental and statistical analysis of effect of Si modification and grain refinement on tensile properties of A356 alloy. Politeknik Dergisi, 24(4), 1409-1417. https://doi.org/10.2339/politeknik.707109
Tekin, M., Polat, G., Kalay, Y. E., & Kotan, H. (2021). Grain size stabilization of oxide dispersion strengthened CoCrFeNi-Y2O3 high entropy alloys synthesized by mechanical alloying. Journal of Alloys and Compounds, 887, 161363. https://doi.org/10.1016/j.jallcom.2021.161363
Kotan, H., Polat, G., & Yildiz, A. B. (2021). Effect of Hf additions on phase transformation, microstructural stability, and hardness of nanocrystalline 304L stainless steels synthesized by mechanical alloying. Advanced Powder Technology, 32(8), 3117-3124. https://doi.org/10.1016/j.apt.2021.07.004
Polat, G., Canbolat, I. E., Uzunoğlu, A., & Kotan, H. (2021). Effect of milling time, MWCNT content, and annealing temperature on microstructure and hardness of Fe/MWCNT nanocomposites synthesized by high-energy ball milling. Advanced Powder Technology, 32(8), 3107-3116. https://doi.org/10.1016/j.apt.2021.06.024
Polat, G., & Kotan, H. (2021). Effect of composition, mechanical alloying temperature and cooling rate on martensitic transformation and its reversion in mechanically alloyed stainless steels. Metals and Materials International, 27, 3765-3775. https://doi.org/10.1007/s12540-020-00866-8
Yürektürk, Y. (2021). Modification of Cold-Sprayed Aluminum Coating on Nickel-Aluminum Bronze by Micro-Arc Oxidation. Journal of Thermal Spray Technology, 30(5), 1274-1283. https://doi.org/10.1007/s11666-021-01209-8
Uygur, E., Yayla, M. A., Yürektürk, Y., & Akpinar, F. (2021). The Use of Twisting and Tightening Tool to Strengthen the Cerclage and Tension Band Wiring. Surgical Innovation, 28(1), 155-158. https://doi.org/10.1177/1553350620965332
Akçamlı, N., & Şenyurt, B. (2021). Fabrication and characterization of in-situ Al3Ni intermetallic and CeO2 particulate-reinforced aluminum matrix composites. Ceramics International, 47(15), 21197-21206. https://doi.org/10.1016/j.ceramint.2021.04.122
Akçamlı, N., & Şenyurt, B. (2021). B4C particulate-reinforced Al-8.5 wt% Si-3.5 wt% Cu matrix composites: powder metallurgical fabrication, age hardening, and characterization. Ceramics International, 47(5), 6813-6826. https://doi.org/10.1016/j.ceramint.2020.11.024
Şenyurt, B., Akçamlı, N., & Ağaoğulları, D. (2021). In-situ synthesis of tungsten boride-carbide composite powders from WO3-B2O3–Mg–C quaternary system via a mechanochemical route. Ceramics International, 47(2), 1640-1650. https://doi.org/10.1016/j.ceramint.2020.08.280
Duman, Ş., & Bulut, B. (2021). Effect of akermanite powders on mechanical properties and bioactivity of chitosan-based scaffolds produced by 3D-bioprinting. Ceramics International, 47(10), 13912-13921. https://doi.org/10.1016/j.ceramint.2021.01.258
Sarı, H. A., Gözüaçık, N. K., Kaya, M. Y., Menşur, E., & Alkoy, S. (2021). Lead-based antiferroelectrics revisited for high energy density capacitors and large strain actuators. Ferroelectrics, 586(1), 21-40. https://doi.org/10.1080/00150193.2021.2014258
Eken, T. Y., Sarioglu, C., & Kucuk, I. (2021). Corrosion behaviour of twin-roll cast 8006 aluminium alloy foil with different thicknesses for the food packaging industry. Journal of Engineering, Design and Technology, 19(6), 1421-1432. https://doi.org/10.1108/JEDT-10-2020-0402
Ates, S., Tarı, D., Safaltın, Ş., Küçükelyas, B., Özçelik, D. Y., & Gürmen, S. (2021). Performance comparison of FeNiCo, FeNiCu and FeNiCoCu alloy particles as catalyst material for polymer electrolyte membrane fuel cells. Reaction Kinetics, Mechanisms and Catalysis, 134(2), 811-822.

2020

Kaykılarlı, C., Uzunsoy, D., Parmak, E. D. Ş., Fellah, M. F., & Çakır, Ö. Ç. (2020). Boron and nitrogen doping in graphene: an experimental and density functional theory (DFT) study. (1), 010027.1, Nano Express. DOI 10.1088/2632-959X/ab89e9.
Topateş, G., & Kalemtaş, A. (2020). Production of Si3N4 porous beads via carbothermal reduction and nitridation technique. Journal of Asian Ceramic Societies, 8(4), 1197-1205. https://doi.org/10.1080/21870764.2020.1833415
Terzioglu, P., Altin, Y., Kalemtas, A., & Celik Bedeloglu, A. (2020). Graphene oxide and zinc oxide decorated chitosan nanocomposite biofilms for packaging applications. Journal of Polymer Engineering, 40(2), 152-157. https://doi.org/10.1515/polyeng-2019-0240
Kalemtas, A., Topates, G., Aytekin Aydin, M. T., & Özey, N. (2020). Starch consolidation of SiC ceramics: processing and low-temperature sintering in an air atmosphere. Journal of Asian Ceramic Societies, 8(1), 106-115. https://doi.org/10.1080/21870764.2019.171001
Colak, Ö. U., Bahlouli, N., Uzunsoy, D., & Francart, C. (2020). High strain rate behavior of graphene-epoxy nanocomposites. Polymer Testing, 81, 106219. https://doi.org/10.1016/j.polymertesting.2019.106219
Liu, H., Liu, J., Kaboglu, C., Zhou, J., Kong, X., Blackman, B. R., ... & Dear, J. P. (2020). The behaviour of fibre-reinforced composites subjected to a soft impact-loading: An experimental and numerical study. Engineering Failure Analysis, 111, 104448. https://doi.org/10.1016/j.engfailanal.2020.104448
Uludağ, M. (2020). A statistical assessment of casting quality–tribological properties of eutectic Al-12Si alloy: effect of Mg. Journal of Materials Engineering and Performance, 29(11), 7526-7543. https://doi.org/10.1007/s11665-020-05225-7
Gurtaran, M., & Uludağ, M. (2020). Effect of Ti addition holding time on casting quality and mechanical properties of A356 alloy. SN Applied Sciences, 2(11), 1833. | https://doi.org/10.1007/s42452-020-03659-1
Uludağ, M. (2020). Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys. China Foundry, 17(5), 372-377.
POLAT, G., Batibay, A. B., & Kotan, H. (2020). Understanding microstructural evolution and hardness of nanostructured Fe89. 5Ni8Zr2. 5 alloy produced by mechanical alloying and pressureless sintering. Engineering Science and Technology, an International Journal, 23(5), 1279-1284. https://doi.org/10.1016/j.jestch.2020.03.010
Domun, N., Paton, K. R., Blackman, B. R., Kaboglu, C., Vahid, S., Zhang, T., ... & Hadavinia, H. (2020). On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites. Journal of Materials Science, 55(11), 4717-4733.
Mensur‐Alkoy, E., Kaya, M. Y., Sarı, H. A., Pekel, O., Olukkent, R., Tur, Y. K., ... & Alkoy, S. (2020). Mechanical and electromechanical properties of piezoelectric ceramic fibers drawn by the alginate gelation method. International Journal of Applied Ceramic Technology, 17(3), 1371-1381. https://doi.org/10.1111/ijac.13405

2019

Kotan, H. (2019). Effect of Y and nano Y2O3 additions on grain growth and hardness of nanocrystalline austenitic stainless steels produced by mechanical alloying. Journal of the Faculty of Engineering and Architecture of Gazi University, 34(3), 1266-1272. DOI: 10.17341/gazimmfd.460523
Akçamlı, N., Küçükelyas, B., Kaykılarlı, C., & Uzunsoy, D. (2019). Investigation of microstructural, mechanical and corrosion properties of graphene nanoplatelets reinforced Al matrix composites. Materials Research Express, 6(11), 115627. DOI 10.1088/2053-1591/ab511f
Zoraga, M., Kahruman, C., & Yusufoglu, I. (2019). Kinetics of celestite conversion to acidic strontium oxalate hydrate in aqueous solution of oxalic acid. Transactions of Nonferrous Metals Society of China, 29(6), 1332-1345. https://doi.org/10.1016/S1003-6326(19)65040-5
Aslan, C., Ilhan, S., Kalpakli, A. O., Kahruman, C., & Yusufoglu, I. (2019). Reaction mechanism of strontium cobaltite synthesis from equimolar mixture of Sr (NO3) 2 and Co (NO3) 2∙ 6H2O under air atmosphere. Thermochimica Acta, 676, 52-63. https://doi.org/10.1016/j.tca.2019.03.030
Tekoğlu, E., Yürektürk, Y., Ağaoğulları, D., Ovalı, D., Mertdinç, S., & Öveçoğlu, M. L. (2019). Characterization of mechanically alloyed and pressureless sintered Al-7 wt% Si-2 wt% LaB6-2 wt%(MoSi2, WSi2) hybrid composites. Advanced Powder Technology, 30(11), 2626-2635. https://doi.org/10.1016/j.apt.2019.08.010
Tekoğlu, E., Yürektürk, Y., Ağaoğulları, D., Dilawary, S. A. A., Baydoğan, M., & Öveçoğlu, M. L. (2019). Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt.% Si-10 wt.% TiB2 composites produced by sequential milling and pressureless sintering. International Journal of Materials Research, 110(11), 1047-1057. https://doi.org/10.3139/146.111830
Gecu, R., Yurekturk, Y., Tekoglu, E., Muhaffel, F., & Karaaslan, A. (2019). Improving wear resistance of 304 stainless steel reinforced AA7075 aluminum matrix composite by micro-arc oxidation. Surface and Coatings Technology, 368, 15-24. https://doi.org/10.1016/j.surfcoat.2019.04.029
Liu, J., Liu, H., Kaboglu, C., Kong, X., Ding, Y., Chai, H., ... & Dear, J. P. (2019). The impact performance of woven-fabric thermoplastic and thermoset composites subjected to high-velocity soft-and hard-impact loading. Applied Composite Materials, 26, 1389-1410.
Domun, N., Kaboglu, C., Paton, K. R., Dear, J. P., Liu, J., Blackman, B. R., ... & Hadavinia, H. (2019). Ballistic impact behaviour of glass fibre reinforced polymer composite with 1D/2D nanomodified epoxy matrices. Composites Part B: Engineering, 167, 497-506. https://doi.org/10.1016/j.compositesb.2019.03.024
Liu, H., Liu, J., Kaboglu, C., Chai, H., Kong, X., Blackman, B. R., ... & Dear, J. P. (2019). Experimental and numerical studies on the behaviour of fibre-reinforced composites subjected to soft impact loading. Procedia Structural Integrity, 17, 992-1001. https://doi.org/10.1016/j.prostr.2019.08.132
Ağaoğulları, D., Balcı, Ö., Akçamlı, N., Duman, I., & Öveçoğlu, M. L. (2019). Effects of different milling conditions on the properties of lanthanum hexaboride nanoparticles and their sintered bodies. Ceramics International, 45(15), 18236-18246. https://doi.org/10.1016/j.ceramint.2019.06.034
Ağaoğulları, D., Balcı, Ö., Akçamlı, N., Suryanarayana, C., Duman, I., & Öveçoğlu, M. L. (2019). Mechanochemical synthesis and consolidation of nanostructured cerium hexaboride. Processing and Application of Ceramics, 13(1), 32-43. https://doi.org/10.2298/PAC1901032A
Poudeh, L. H., Avcioglu, C., Duman, S., & Özkal, B. (2019). Preparation and characterization of ceramic oxide granules by spray drying technique.
Yürektürk, Y., & Baydoğan, M. (2018). Effect of aluminizing and austempering processes on structural, mechanical and wear properties of a SSF ductile iron. Materials Research Express, 6(1), 016550. DOI 10.1088/2053-1591/aae804

2018

Taş, M.,İşlek Cin, Z., Sam Parmak, E. D., & Çelik Bedeloğlu, A. (2018). Fabrication of unilateral conductive and transparent polymer thin films decorated with nanomaterials for flexible electrodes. Polymer Composites, 39(5), 1771-1778. https://doi.org/10.1002/pc.24109
Kınagu, H. M., Gökçedağlıoğlu, M., Ateş, F., Küçükelyas, B., Mutlu, M., Erhuy, C. G., & Uzunsoy, D. (2018). Suggestion of an Indicator to Evaluate Material Deposition in Resistance Spot Welding: Weld–Surface Interaction Index. Journal of Materials Engineering and Performance, 27, 5086-5094. https://doi.org/10.1007/s11665-018-3535-z
Kotan, H. (2018). Thermal stability, phase transformation and hardness of mechanically alloyed nanocrystalline Fe-18Cr-8Ni stainless steel with Zr and Y2O3 additions. Journal of Alloys and Compounds, 749, 948-954. https://doi.org/10.1016/j.jallcom.2018.03.324
Kotan, H., & Darling, K. A. (2018). A study of microstructural evolution of Fe-18Cr-8Ni, Fe-17Cr-12Ni, and Fe-20Cr-25Ni stainless steels after mechanical alloying and annealing. Materials Characterization, 138, 186-194. https://doi.org/10.1016/j.matchar.2018.02.001
Yürektürk, Y., & Baydoğan, M. (2018). Effect of aluminizing and austempering processes on structural, mechanical and wear properties of a SSF ductile iron. Materials Research Express, 6(1), 016550. DOI 10.1088/2053-1591/aae804
Tekoğlu, E., Ağaoğulları, D., Yürektürk, Y., Bulut, B., & Öveçoğlu, M. L. (2018). Characterization of LaB6 particulate-reinforced eutectic Al-12.6 wt% Si composites fabricated via mechanical alloying and spark plasma sintering. Powder Technology, 340, 473-483. https://doi.org/10.1016/j.powtec.2018.09.055
Yürektürk, Y., & Baydoğan, M. (2018). Characterization of ferritic ductile iron subjected to successive aluminizing and austempering. Surface and Coatings Technology, 347, 142-149. https://doi.org/10.1016/j.surfcoat.2018.04.083
Terzioğlu, P., Öğüt, H., & Kalemtaş, A. (2018). Natural calcium phosphates from fish bones and their potential biomedical applications. Materials Science and Engineering: C, 91, 899-911. https://doi.org/10.1016/j.msec.2018.06.010
Kalemtaş, A., Özey, N., & Aytekin Aydin, M. T. (2018). Processing of layered porous mullite ceramics. Journal of the Australian Ceramic Society, 54, 545-555. https://doi.org/10.1007/s41779-018-0183-6
Kalemtas, A., Arslan, G., Kaya, P., Turan, S., & Kara, F. (2018). Processing of in-situ SiC reinforced AlN based composites. Journal of Ceramic Processing Research, 19(2), 119-125.
Kaboglu, C., Yu, L., Mohagheghian, I., Blackman, B. R., Kinloch, A. J., & Dear, J. P. (2018). Effects of the core density on the quasi-static flexural and ballistic performance of fibre-composite skin/foam-core sandwich structures. Journal of Materials Science, 53, 16393-16414.
Kaboglu, C., Mohagheghian, I., Zhou, J., Guan, Z., Cantwell, W., John, S., ... & Dear, J. P. (2018). High-velocity impact deformation and perforation of fibre metal laminates. Journal of materials science, 53(6), 4209-4228.
Uludağ, M., Yazman, Ş., Gemi, L., Bakircioğlu, B., Erzi, E., & Dispinar, D. (2018). Relationship between machinability, microstructure, and mechanical properties of Al-7Si alloy. Journal of Testing and Evaluation, 46(6), 2592-2603. https://doi.org/10.1520/JTE20170083
Uludağ, M., Cetin, R., Dişpinar, D., & Tiryakioğlu, M. (2018). On the interpretation of melt quality assessment of A356 aluminum alloy by the reduced pressure test: the bifilm index and its physical meaning. International Journal of Metalcasting, 12, 853-860. https://doi.org/10.1007/s40962-018-0217-4
Uludağ, M., Cetin, R., Gemi, L., & Dispinar, D. (2018). Change in porosity of A356 by holding time and its effect on mechanical properties. Journal of Materials Engineering and Performance, 27, 5141-5151. https://doi.org/10.1007/s11665-018-3534-0
Gemi, L., Kayrıcı, M., Uludağ, M., Gemi, D. S., & Şahin, Ö. S. (2018). Experimental and statistical analysis of low velocity impact response of filament wound composite pipes. Composites Part B: Engineering, 149, 38-48. https://doi.org/10.1016/j.compositesb.2018.05.006
Uludağ, M., Cetin, R., Dispinar, D., & Tiryakioğlu, M. (2018). The effects of degassing, grain refinement & Sr-addition on melt quality-hot tear sensitivity relationships in cast A380 aluminum alloy. Engineering Failure Analysis, 90, 90-102. https://doi.org/10.1016/j.engfailanal.2018.03.025
Uludağ, M., Cetin, R., Dispinar, D., & Tiryakioğlu, M. (2018). Effect of degassing and grain refinement on hot tearing tendency in Al8Si3Cu alloy. International Journal of Metalcasting, 12, 589-595. https://doi.org/10.1007/s40962-017-0197-9
Uludağ, M., Cetin, R., & Dispinar, D. (2018). Freezing range, melt quality, and hot tearing in Al-Si alloys. Metallurgical and Materials Transactions A, 49, 1948-1961. https://doi.org/10.1007/s11661-018-4512-8
Kaya, M. Y., Menşur-Alkoy, E., Gürbüz, A., Öner, M., & Alkoy, S. (2018). Influence of Compositional Variation on the Electrical Properties of [Pb (Zn 1/3 Nb 2/3) O 3]–[Pb (Zr, Ti) O 3] Ceramics and Their Transducer Application. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 65(7), 1268-1277. DOI: 10.1109/TUFFC.2018.2829800